Luthier Talk (3,806)

Discussions Replies Latest Activity

Koa Soundboards

Hello, I will be finishing my first Koa soundboard very soon and am trying to figure out what to use to fill the pores without inhibiting/…

Started by Ray Hodgson

1 Sep 22, 2008
Reply by Donald A. Fortune

Plastic washers on tuners.

I have an Epiphone acoustic guitar that recently started having trouble staying in tune. I got out a screwdriver and tightened the screws t…

Started by Matthew Koyle

4 Sep 21, 2008
Reply by Matthew Koyle

Need some truss rod advise

Hi, I recently finished my first archtop guitar and it worked out ok but I can't get the neck to straighten out. I used a single piece of…

Started by Jeff

4 Sep 21, 2008
Reply by Frank Ford

Leaving Strap Button Hole Open

This is perhaps a ridiculously paranoid question and I'm almost positive the answer has to be "no" but here goes anyway... On a guitar wit…

Started by Brent Hutto

3 Sep 21, 2008
Reply by Frank Ford

Nut glue

What type of glue is best when replacing a nut. Superglue? Wood glue?

Started by Wayne Walker

6 Sep 19, 2008
Reply by Martin Edwards

Filling fret slot ends

In Frank Ford's discussion on re: refretting a 1973 D-35 (see link below)...

Started by Brian Farrell

2 Sep 18, 2008
Reply by Steve Smith

Acoustic sustain

Greetings, I have a j-40mc Jumbo Martin with an interior pickup. My problem is the low e strings sustains to much causing what is close to…

Started by Ed Fry

7 Sep 18, 2008
Reply by Ed Fry

Warp factor 8

I purchased 4 b&s sets from the USA and had them sent over to me in the UK. This was about 3 months ago. I'll state straight away that…

Started by David Nelson

6 Sep 18, 2008
Reply by David Nelson

Dovetail to Bolt-on conversion

Has there been a documented discussion anywhere online on the process of converting a dovetail neck joint to a bolt on? I am a beginner at…

Started by Brian Farrell

10 Sep 17, 2008
Reply by Magnus Hultin

odd guitar scale length

I am building a copy of my first classical guitar, a 1960's Goya G1, which has a 630 mm scale length. I seem to recall reading an article,…

Started by Larry Schultz

7 Sep 17, 2008
Reply by Magnus Hultin


© 2017   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service