Luthier Talk (4,370)
| Discussions | Replies | Latest Activity |
|---|---|---|
MandolinettoHi, I have a Mandolinetto that I listed on ebay yesterday. A couple of fellow instrument enthusiasts have sent me messages saying I should… Started by Sunny Cooper |
3 |
Jul 14, 2009 Reply by Antonio Cotichini |
The Kentucky MIJ MandolinsI have a 1980's KM-850 Bought on Ebay.Fantastic wood & workmanship-almost mint-which brings me to the problem.I think it has hardly bee… Started by mike carne |
20 |
Jul 13, 2009 Reply by mike carne |
Nasty headstock break on OME Banjo - Any advice?This is the worst break I've seen. In addition to the normal break thru the volute, the headstock veneer is separated for about 1/2 in. on… Started by Bill Langsdorf |
4 |
Jul 13, 2009 Reply by Bill Langsdorf |
Looking for a Gibson pickguard....I'll tell the embarrassing story on myself: While doing a neck reset on an older Gibson acoustic, I was pre-heating the neck joint area wit… Started by Mike Kolb |
8 |
Jul 12, 2009 Reply by Mike Kolb |
Builders with mahogany topsThe saga goes on and I'm still trying to "spend down" my parts box. While looking over all the sheet goods I noticed that I had sufficient… Started by Rob Mercure |
6 |
Jul 12, 2009 Reply by Tim Mace |
Is This Saddle Bone, or What?I bought a used guitar and this is the saddle that was installed. It is to be replaced because it's too short and the top doesn't have the… Started by Brent Hutto |
11 |
Jul 12, 2009 Reply by Tim Mace |
Gluing Ebony to Goncalo AlvesI will be needing to glue an ebony fretboard to a Goncalo Alves neck blank in the near future. Would hide glue be a good choice? Folks on M… Started by Michael Polutta |
5 |
Jul 9, 2009 Reply by Paul Hostetter |
I Think I Did Myself A Mischief With Ebony DustYesterday I was shimming up the saddle on one of my guitars by about 0.025" to raise the action a little without making a new saddle. The o… Started by Brent Hutto |
14 |
Jul 7, 2009 Reply by Ry Charters |
Action measuresDoes anybody know the exact measure of the action at 12th fret on Taylor guitars? Thanks Antonio Started by Antonio Cotichini |
5 |
Jul 7, 2009 Reply by Donald A. Fortune |
BoneHow do you manage when (if ever) using natural (not prepared) bone for nuts and saddles? I have a friend who owns an industrial butchery. S… Started by Antonio Cotichini |
3 |
Jul 6, 2009 Reply by Tim Mace |
© 2024 Created by Frank Ford.
Powered by
