FRETS.NET

Chris Rochow's Discussions (131)

Discussions Replied To (119) Replies Latest Activity

"Thank you for all the inputs!   Who then is a good source of the 1/4"   exotic woods…"

Chris Rochow replied Feb 2, 2012 to Veneer sources

10 Feb 5, 2012
Reply by Eric Steven Johansen

"Thanks.... yes, I agree, THIN 'veneer' is not what I really was looking for... the 1…"

Chris Rochow replied Jan 31, 2012 to Veneer sources

10 Feb 5, 2012
Reply by Eric Steven Johansen

".......http://www.gryphonstrings.com/mercantile/Accessories.php"

Chris Rochow replied Jan 28, 2012 to Loose end pin jack

18 Jan 28, 2012
Reply by Chris Rochow

"Ian, forgot to mention,  BTW; I use 'silver solder'...it allows beter electrical con…"

Chris Rochow replied Jan 25, 2012 to Tips For Electronics Work

13 Jan 26, 2012
Reply by Ned Knepp

"If you need to remove the jack from the guitar....use a 1/4" dowel into the jack....…"

Chris Rochow replied Jan 23, 2012 to Loose end pin jack

18 Jan 28, 2012
Reply by Chris Rochow

"Best advice I could give regarding HHG......BE PREPARED!!!!!! Have all your clamps (…"

Chris Rochow replied Jan 23, 2012 to hide glue

18 Jan 25, 2012
Reply by Hesh Breakstone

"The absolutely best supplier of CA glue is Satellite City Mfg. ! http://www.caglue.c…"

Chris Rochow replied Jan 23, 2012 to super glue

24 Jul 15, 2012
Reply by Bill Langsdorf

"For years I have used (and loved!) my Weller Soldering Station."

Chris Rochow replied Jan 23, 2012 to Tips For Electronics Work

13 Jan 26, 2012
Reply by Ned Knepp

"Mike...Do you happen to have enough scrap wood round to build an Ark???"

Chris Rochow replied Jan 21, 2012 to Back to the shop in a bit, but first...

11 Jan 21, 2012
Reply by Ian Supplee

"Best place I found for excellent shellac is;   www.shellac.net   Various "colors" to…"

Chris Rochow replied Jan 16, 2012 to Shellac finish care and general info wanted

8 Jan 19, 2012
Reply by Joe Fox

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service