FRETS.NET

thefishinmusician's Discussions (348)

Discussions Replied To (272) Replies Latest Activity

"Masking..I will try to explain, and will post photo's soon..A strip of masking tape…"

thefishinmusician replied Dec 30, 2008 to Polishing Frets

13 Dec 30, 2008
Reply by thefishinmusician

"No, that will not work at all"

thefishinmusician replied Dec 27, 2008 to Traces of glue

7 Dec 28, 2008
Reply by Jim Bancroft

"Press down on the first fret on the g string and at, say the 14th fret at the same t…"

thefishinmusician replied Dec 27, 2008 to new guitar but the strings are twangy

2 Dec 27, 2008
Reply by thefishinmusician

"If you are just trying to get it down to the point of leaving 1/2 of the string diam…"

thefishinmusician replied Dec 18, 2008 to Nut slots, lowering and polishing Q?

10 Dec 25, 2008
Reply by Magnus Hultin

"Yes....I say you should tape off both sides od the nut so you don't fruck up the fin…"

thefishinmusician replied Dec 17, 2008 to Nut slots, lowering and polishing Q?

10 Dec 25, 2008
Reply by Magnus Hultin

"When I use superglue, with a clamp, I swab the edge with accelerator....A Q tip will…"

thefishinmusician replied Dec 17, 2008 to Huge fret slots - what's the best way to snug them up?

15 Jan 1, 2009
Reply by FRANK

"Possibly just removing the fingerboard, do the neck narrowing......Reglue fingerboar…"

thefishinmusician replied Dec 16, 2008 to traditional style 00-21 has too wide a neck

12 Dec 26, 2008
Reply by mike carne

"Biggest problem is to keep the radius of the nut consistant with the radius of the f…"

thefishinmusician replied Dec 13, 2008 to refreting and floyd rose

4 Dec 15, 2008
Reply by Nick Anthony

"I have also used a graphite solution to a badly bowed neck..It was an old dobro..But…"

thefishinmusician replied Dec 13, 2008 to Vega Tenor neck

5 Dec 13, 2008
Reply by thefishinmusician

"Why exactly do you need to use suction?"

thefishinmusician replied Dec 10, 2008 to Suction Cups on Porous Lacquer Finish

4 Jul 4, 2019
Reply by Stanley Alexandrowicz

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service