FRETS.NET

Bob Steinarsson's Discussions (118)

Discussions Replied To (88) Replies Latest Activity

"My early 60s Hofner jazz box requiers a 6 mm wrench (see picture), and my 66 or 67 H…"

Bob Steinarsson replied Dec 26, 2016 to 1960's Höfner Truss Rod thread size!

6 Dec 26, 2016
Reply by Darren

"Thanks. I will send this to the owner, but I am afraid that I will be the one who wi…"

Bob Steinarsson replied Dec 17, 2016 to Martin with truss rod nut that refuses to go further

5 Dec 17, 2016
Reply by Bob Steinarsson

"Does nobody know if it is possible to screw out the truss rod nut in a Martin J40 -…"

Bob Steinarsson replied Dec 14, 2016 to Martin with truss rod nut that refuses to go further

5 Dec 17, 2016
Reply by Bob Steinarsson

"I have a 16 years old Larrivee that I bought cheaply that has got a crack like this.…"

Bob Steinarsson replied Apr 4, 2016 to Top center seam separation/split

6 Apr 5, 2016
Reply by Howard Klepper

"I printed it all to PDF. Now I have everything from this page saved! Thanks again, N…"

Bob Steinarsson replied Dec 2, 2014 to Neck Re-Set Gallery

153 Jun 22, 2023
Reply by LarrySB

"A day without learning is wasted. Thanks for your valuable contribution for today's…"

Bob Steinarsson replied Dec 2, 2014 to Neck Re-Set Gallery

153 Jun 22, 2023
Reply by LarrySB

"Am am not able to http://home.provide.net/~cfh/hofner2.html any more. What has happe…"

Bob Steinarsson replied Dec 2, 2014 to Neck Re-Set Gallery

153 Jun 22, 2023
Reply by LarrySB

"See this thread: http://fretsnet.ning.com/forum/topics/noobish-question?commentId=21…"

Bob Steinarsson replied Oct 8, 2014 to Truss rod adjustment run out

13 Oct 8, 2014
Reply by John

"I miss the "like" knob."

Bob Steinarsson replied May 14, 2014 to Mechanic's Stethoscope for Buzzing?

6 May 14, 2014
Reply by Robbie Collins

"Is Tung Oil and Tru Oil the same thing? "

Bob Steinarsson replied Apr 2, 2014 to Tung Oil Finish Question

20 Apr 5, 2014
Reply by William F.Eden

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service