FRETS.NET

Len Biglin's Discussions (610)

Discussions Replied To (490) Replies Latest Activity

"Hi Paul , the smaller value cap (.022) will roll off the hi sounds only while .047 w…"

Len Biglin replied Dec 12, 2009 to wireing a les paul?

10 Dec 12, 2009
Reply by Len Biglin

"Hi Valerie , Some of the best guitar makers use bolts Taylor are very popular (1/3 o…"

Len Biglin replied Dec 10, 2009 to Building new, alternative to dovetail ?

16 Dec 14, 2009
Reply by Ned Knepp

"Hi again , Just to clear things up a bit , My method above uses the desk lamp to war…"

Len Biglin replied Dec 8, 2009 to Softening plastic binding

6 Dec 8, 2009
Reply by Len Biglin

"Hi Griff , just shime a 100w desk lamp at the area to warm it up , the binding will…"

Len Biglin replied Dec 8, 2009 to Softening plastic binding

6 Dec 8, 2009
Reply by Len Biglin

"Hi Rob , measure the max dia. of the pins,drill a little smaller,then put a rat-tail…"

Len Biglin replied Dec 8, 2009 to Martin Pin Hole DIA ?

5 Dec 8, 2009
Reply by Ron Frazier

"Hi Doug, My guess is that the saddle is a bit low , causing fret buzz. The reason it…"

Len Biglin replied Dec 6, 2009 to Dull Fuzzy notes on high E string

7 Dec 6, 2009
Reply by Len Biglin

"Hi Brad , I'd like to add another point of view. Lowering the action does not have t…"

Len Biglin replied Dec 6, 2009 to adjusting action

9 Dec 7, 2009
Reply by Magnus Hultin

"Yes Joshua is right , neck and bridge are same , They use one Meg pots to try and sa…"

Len Biglin replied Nov 30, 2009 to Fender Vintage Noiseless Pickups Installation

5 Dec 1, 2009
Reply by Donald A. Fortune

"Dave are you saying you use epoxy as a grain filler ? How do you apply it? and do yo…"

Len Biglin replied Nov 18, 2009 to cocobolo finish problem 411

10 Nov 20, 2009
Reply by Dave Yelverton

"Hi Paul , if it's forming fisheyes , sand it smooth wash with grease and wax remover…"

Len Biglin replied Nov 18, 2009 to cocobolo finish problem 411

10 Nov 20, 2009
Reply by Dave Yelverton

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service