FRETS.NET

Brian Burns's Discussions (102)

Discussions Replied To (72) Replies Latest Activity

"Hello John, That's a good question! Unlike most classical builders I make a conical…"

Brian Burns replied Aug 14, 2019 to CA in the fret slot?

32 Aug 25, 2019
Reply by Glen H

"Hello Rusty, A fellow techno-weenie! Have a look at the "My Process" section of my w…"

Brian Burns replied Aug 13, 2019 to CA in the fret slot?

32 Aug 25, 2019
Reply by Glen H

"Hello Rusty, I agree about the little things, and that's why I asked about CA in the…"

Brian Burns replied Aug 12, 2019 to CA in the fret slot?

32 Aug 25, 2019
Reply by Glen H

"Hello Glen, I'm blessed with a big shop. It came with the house when we moved to For…"

Brian Burns replied Aug 25, 2018 to Machine sanding rosewood

18 Aug 25, 2018
Reply by Brian Burns

" RE: Machine sanding rosewood (in reply to NorCalluthier)  Hello Al…"

Brian Burns replied Aug 24, 2018 to Machine sanding rosewood

18 Aug 25, 2018
Reply by Brian Burns

"Hello Randall, Thanks for the tip! I ordered some from Amazon. Cheers, Brian"

Brian Burns replied Aug 21, 2018 to Machine sanding rosewood

18 Aug 25, 2018
Reply by Brian Burns

"Hello Allan, I've given the idea of building a drum sander a lot of thought. A relat…"

Brian Burns replied Aug 19, 2018 to Machine sanding rosewood

18 Aug 25, 2018
Reply by Brian Burns

"Hello Thomas, I'm glad that your visit was a help---just what every teacher loves to…"

Brian Burns replied Aug 19, 2018 to Machine sanding rosewood

18 Aug 25, 2018
Reply by Brian Burns

"Hello Roger, What goes around comes around. Here is one of the best examples I know…"

Brian Burns replied Aug 13, 2018 to Machine sanding rosewood

18 Aug 25, 2018
Reply by Brian Burns

"Hello Guys, I don't sand to a thickness, I sand to a resonance on my "initial voicin…"

Brian Burns replied Aug 13, 2018 to Machine sanding rosewood

18 Aug 25, 2018
Reply by Brian Burns

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service