FRETS.NET

Murray MacLeod's Discussions (110)

Discussions Replied To (109) Replies Latest Activity

"I would just like to reinforce Ron's emphasis on gluing ASAP after sanding or otherw…"

Murray MacLeod replied Oct 4, 2016 to Metal Martin with loose bridge .

6 Oct 5, 2016
Reply by Len Biglin

"Shimming the fretboard on a National is a non-starter IMO. Read through this article…"

Murray MacLeod replied Jun 11, 2016 to Help..Neck Straighten and shim on National guitar

3 Jun 11, 2016
Reply by danny mangold

"I have both the Summit  tang nippers and the end nippers ... I got them around a yea…"

Murray MacLeod replied Jun 7, 2016 to Summit fret tang nippers. Anyone tried them?

11 Sep 3, 2017
Reply by Robbie Collins

"I know that was just a typo ... you did mean the  6th fret, didn't you ? ..."

Murray MacLeod replied May 30, 2016 to Measuring relief with string vs. straightedge

11 Jun 3, 2016
Reply by Christopher Parker

"The turnbuckle might be stainless, but the rods themselves are bright mild steel sur…"

Murray MacLeod replied Sep 30, 2015 to looking for old Banjo part source

12 Sep 30, 2015
Reply by Steve Bettesworth

"If anybody is interested in seeing more of Dennis' work on this fretted fiddle, ther…"

Murray MacLeod replied Sep 20, 2015 to 5 string fretted violin needs frets

41 Sep 20, 2015
Reply by Murray MacLeod

"I would also like to apologize to Dennis for drawing attention to the fact that the…"

Murray MacLeod replied Sep 18, 2015 to 5 string fretted violin needs frets

41 Sep 20, 2015
Reply by Murray MacLeod

"The fret in the close-up pic has a really wide flat on top. Have you done further cr…"

Murray MacLeod replied Sep 18, 2015 to 5 string fretted violin needs frets

41 Sep 20, 2015
Reply by Murray MacLeod

"The only admonition I  would give is for anyone discussing the process  to refer to…"

Murray MacLeod replied Jul 13, 2015 to Is torrified wood worth trying?

11 Aug 2, 2015
Reply by Jonathan Conant

"FWIW , I will add my take on the matter. I tend more to the "Occam's razor" approach…"

Murray MacLeod replied Jul 11, 2015 to Are neck jigs necessary?

97 Sep 17, 2015
Reply by steven gallagher

RSS

© 2019   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service