FRETS.NET

Tom Mitchell's Discussions (53)

Discussions Replied To (44) Replies Latest Activity

"The added cap is there to boost the mids and highs when you lower your volume.  As y…"

Tom Mitchell replied Oct 19, 2011 to tone cap question

11 Oct 20, 2011
Reply by David Reilly

"Post a picture of your set-up!!!"

Tom Mitchell replied Oct 19, 2011 to proper way to shave-down saddle to lower action

38 Oct 16, 2012
Reply by Paul Verticchio

"I thought I'd share an idea I plan to try out soon.  To have the spool clamps open t…"

Tom Mitchell replied Oct 18, 2011 to Gluing on a front.

19 Oct 27, 2011
Reply by Tom Mitchell

"And this link - to test for "true" bakelite - http://vintagejewelrylane.com/informat…"

Tom Mitchell replied Oct 11, 2011 to Flattening old Bakelite pick guards and source for new guards?

30 Oct 13, 2011
Reply by Kerry Krishna

"Here's a link that has some interesting information!   http://vintagejewelrylane.com…"

Tom Mitchell replied Oct 11, 2011 to Flattening old Bakelite pick guards and source for new guards?

30 Oct 13, 2011
Reply by Kerry Krishna

"I enjoy "teachable moments".  I knew Bakelite is thermoset.  I wasn't familar with C…"

Tom Mitchell replied Oct 11, 2011 to Flattening old Bakelite pick guards and source for new guards?

30 Oct 13, 2011
Reply by Kerry Krishna

"Paul makes some very good points, and I'd like to expand on them.  Celluloid (like B…"

Tom Mitchell replied Oct 11, 2011 to Flattening old Bakelite pick guards and source for new guards?

30 Oct 13, 2011
Reply by Kerry Krishna

"Not that I'd ever done this, so consider my FREE advice to be worth every penny...  …"

Tom Mitchell replied Oct 11, 2011 to Flattening old Bakelite pick guards and source for new guards?

30 Oct 13, 2011
Reply by Kerry Krishna

"I found this link on Allied Lutherie's website about filling holes in wood - http://…"

Tom Mitchell replied Oct 9, 2011 to Termites!!

19 Oct 9, 2011
Reply by Tom Mitchell

"If a box fan makes an arc when I hit the switch, it's NOT going to be used.   I only…"

Tom Mitchell replied Oct 9, 2011 to Newbie spray finishing question

10 Oct 9, 2011
Reply by Tom Mitchell

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service