FRETS.NET

Greg Mirken's Discussions (636)

Discussions Replied To (634) Replies Latest Activity

"Yeah, it will wear pretty quickly. For a more permanent fix, you gotta deepen the sl…"

Greg Mirken replied Sep 7, 2008 to First String Buzz When Sixth String Fretted at Third Fret

7 Sep 7, 2008
Reply by Greg Mirken

"It sounds like a minor problem. The first thing to check for is a loose fret. I use…"

Greg Mirken replied Sep 4, 2008 to Single String Position Buzz

3 Sep 5, 2008
Reply by sunny

"Ooops, didn't see other replies. Back buzz sounds like the likely culprit to me."

Greg Mirken replied Sep 3, 2008 to First String Buzz When Sixth String Fretted at Third Fret

7 Sep 7, 2008
Reply by Greg Mirken

"Jeff, could you share a picture of the neck joint, please? Having never seen or even…"

Greg Mirken replied Sep 2, 2008 to Guild mortise/tenon neck reset

16 Sep 2, 2008
Reply by Greg Mirken

"Charlie, I have used the ones for fingerboard extensions and bridges for 8 or 10 yea…"

Greg Mirken replied Aug 27, 2008 to Heating blankets

7 Sep 9, 2008
Reply by Charlie Hoffman

"My approach is to be sure the customer understands there is no guarantee whatsoever…"

Greg Mirken replied Aug 25, 2008 to Neck heater users?

6 Jan 19, 2009
Reply by thefishinmusician

"I always seem to manage to talk people out of doing this. You should add a reinforc…"

Greg Mirken replied Aug 19, 2008 to Cut Hole in Side of New D-35 for Preamp: Ethics and Methods

17 Jan 5, 2013
Reply by Paul Verticchio

"I was afraid of Guilds, too. I don't have nearly as much experience with them as Mar…"

Greg Mirken replied Aug 18, 2008 to Gibson non-tapered neck dovetails...Aaargh!

5 Aug 24, 2008
Reply by C Herb Hickman

"Clean out the old dried-up grease and smear some white lithium grease in the gear th…"

Greg Mirken replied Aug 17, 2008 to Loose plug on back of older American-made Grover Rotomatic tuners

4 Aug 17, 2008
Reply by Mark

"I have used a drop of thin superglue wicked around the cap. Since nobody has brought…"

Greg Mirken replied Aug 17, 2008 to Loose plug on back of older American-made Grover Rotomatic tuners

4 Aug 17, 2008
Reply by Mark

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service