FRETS.NET

Russell Vance's Discussions (1,232)

Discussions Replied To (1220) Replies Latest Activity

"As you are a beginner to the refinishing business (and we all were at one stage) I w…"

Russell Vance replied May 24, 2009 to Removing nitro-cellulose

16 Jun 11, 2009
Reply by LARRY KLOSE

"It's a Tanglewood guitar, the approved method of repair here is worth more than the…"

Russell Vance replied May 18, 2009 to Epoxied Bridge

6 May 18, 2009
Reply by Jeffrey L. Suits

"The same way I remove epoxied fingerboards, with a machine - machine the bridge off…"

Russell Vance replied May 17, 2009 to Epoxied Bridge

6 May 18, 2009
Reply by Jeffrey L. Suits

"I'm with Frank on this one - my initial attempts at nitro spraying many years ago re…"

Russell Vance replied May 17, 2009 to Nitro finish cracking

6 May 17, 2009
Reply by Russell Vance

"I have installed a lot of Matrix/Martin Thinline Golds in many different guitars and…"

Russell Vance replied May 15, 2009 to Bone or Tusq ??

7 May 16, 2009
Reply by onemanband

"Best value for money at the bottom end of the top end stuff is the Fishman Matrix or…"

Russell Vance replied May 14, 2009 to Martin employee guitar without truss rod !

2 May 14, 2009
Reply by Russell Vance

"I like the idea behind push /push pots but unfortunately they are unreliable and not…"

Russell Vance replied May 13, 2009 to Jimmy Page Wiring

17 May 14, 2009
Reply by Joshua Levin-Epstein

"Darren, Hi, I have been working on new Gibsons including Custom Shop instruments for…"

Russell Vance replied May 12, 2009 to Do Gibson Glue their Frets?

4 May 13, 2009
Reply by Len Biglin

"Hi Rick, go to www.seymourduncan.com select 'support' and then select 'wiring diagra…"

Russell Vance replied May 12, 2009 to Jimmy Page Wiring

17 May 14, 2009
Reply by Joshua Levin-Epstein

"Yep Rob, what you say is sound advice, and if you wish to see the circuits that Fish…"

Russell Vance replied May 1, 2009 to Fishman Acoustic Matrix Volume control sought

11 May 1, 2009
Reply by Russell Vance

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service