FRETS.NET

Russell Vance's Discussions (1,232)

Discussions Replied To (1220) Replies Latest Activity

"Barron Clarke (barronclarkeguitars.com.au) is an Australian resonator builder of som…"

Russell Vance replied Jan 29, 2009 to Building Resonator Guitars

39 Oct 4, 2013
Reply by Don Korth

"Um, dead animal fat on a fingerboard? We have used Kunos Oil (Google it for the spe…"

Russell Vance replied Jan 29, 2009 to Best Fret Board Finish

14 Jan 31, 2009
Reply by Rob

"Pretty much what everyone says one way or the other with the file down to edge and j…"

Russell Vance replied Jan 26, 2009 to Filing Fret Ends

10 Jan 26, 2009
Reply by Russell Vance

"The Stewmac jobs (straight - loads of cutting surface) 150 and 300 grit, (with wide…"

Russell Vance replied Jan 26, 2009 to Which Diamond fret file?

43 Mar 25, 2011
Reply by Brian Hansen

"Yep, I'm sorry, I forgot the obvious- removing slight twists with a fret level is go…"

Russell Vance replied Jan 21, 2009 to A Twist in my customers Neck 70 fender ?

4 Jan 21, 2009
Reply by Russell Vance

"Ah, having been around this buoy a few times....Titebond III has the highest creep o…"

Russell Vance replied Jan 21, 2009 to Why should I be not using Titebond lll

16 Aug 15, 2009
Reply by Markus Schmid

"Dear Paul, A little unusual to see a twisted (not bowed) neck on a 70s F, and I will…"

Russell Vance replied Jan 20, 2009 to A Twist in my customers Neck 70 fender ?

4 Jan 21, 2009
Reply by Russell Vance

"Len Biglen is on the money here (all things being normal otherwize) - you can spend…"

Russell Vance replied Jan 19, 2009 to hum active electronics ?

15 Feb 16, 2009
Reply by Ned Knepp

"Thanks guys, Bob has picked up the issue, it's not about what I use or you use or ho…"

Russell Vance replied Jan 17, 2009 to peghead crack - do i really need hide glue?

34 May 25, 2009
Reply by Len Biglin

"I have followed this thread with some concern, not because the advice has been bad,…"

Russell Vance replied Jan 17, 2009 to peghead crack - do i really need hide glue?

34 May 25, 2009
Reply by Len Biglin

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service