David Payne's Discussions (35)

View

Discussions Replied To (31)	Replies	Latest Activity
"David, Just out of curiosity, isn't the 2, 1, 0 and 00 originally flat top with a s…" David Payne replied Oct 26, 2009 to Little guitars	32	Oct 26, 2009 Reply by David Payne
"Ned, The original braces needed to be replaced because of the flatness problems and…" David Payne replied Oct 26, 2009 to Little guitars	32	Oct 26, 2009 Reply by David Payne
"P.S.: If anyone is interested in the 1929 00 plans, I would be willing to share. Th…" David Payne replied Oct 25, 2009 to Little guitars	32	Oct 26, 2009 Reply by David Payne
"I just finished a full restoration of a 1925 0-18K. It was left in the attic of a ho…" David Payne replied Oct 25, 2009 to Little guitars	32	Oct 26, 2009 Reply by David Payne
"Russell, I didn't take it that way at all, I just had to do a lot of careful prep s…" David Payne replied Oct 25, 2009 to Gluing blackwood	8	Oct 25, 2009 Reply by David Payne
"Russell, The source of the wood has never given me problems with wax. This blackwoo…" David Payne replied Oct 25, 2009 to Gluing blackwood	8	Oct 25, 2009 Reply by David Payne
"Len, It is African Blackwood (Rosewood, Dalbergia melanoxylon). Very black, yellowi…" David Payne replied Oct 25, 2009 to Gluing blackwood	8	Oct 25, 2009 Reply by David Payne
"Dave, I had not thought of naptha but was about to attempt a similar idea with a li…" David Payne replied Oct 24, 2009 to Gluing blackwood	8	Oct 25, 2009 Reply by David Payne
"Frank, Thanks so much. You are a fountain of knowledge. Dave http://home.comcast.n…" David Payne replied Oct 16, 2009 to Where to aquire antique rectangular frets?	9	Oct 17, 2009 Reply by Eric Steven Johansen
"There is an article about Frank's restoration of a 30's era Martin on frets.com that…" David Payne replied Oct 16, 2009 to Where to aquire antique rectangular frets?	9	Oct 17, 2009 Reply by Eric Steven Johansen

Welcome to
FRETS.NET

Sign Up
or Sign In

Members

LARRY KLOSE

Jon Whitney

Carlo Rodrigo

Mike Kolb

View All

© 2024 Created by Frank Ford. Powered by

Badges | Report an Issue | Terms of Service

#xg { position:relative;top:120px; } #xn_bar { top:120px; }

Hello, you need to enable JavaScript to use FRETS.NET.

Please check your browser settings or contact your system administrator.