FRETS.NET

Ronnie Nichols's Discussions (58)

Search Forum

View

Discussions Replied To (57) Replies Latest Activity

"A 3/16 standard drill bit will do the job. Since the holes must be reamed, a little…"

Ronnie Nichols replied Jan 1, 2009 to Drilling bridge pin holes

 4 Jan 2, 2009
Reply by Nick Anthony

"It is hard to judge exactly how high the action will be on a neck reset. I've been s…"

Ronnie Nichols replied Dec 28, 2008 to How can I easily fix a slightly overset neck?

 10 Jan 18, 2009
Reply by Ron Frazier

"Being a guy who is willing to try different things, I understand your frustration wi…"

Ronnie Nichols replied Dec 28, 2008 to Traces of glue

 7 Dec 28, 2008
Reply by Jim Bancroft

"If there is quite a bit to remove I like to use a safe edge file (see Frank's site)…"

Ronnie Nichols replied Dec 18, 2008 to Nut slots, lowering and polishing Q?

 10 Dec 25, 2008
Reply by Magnus Hultin

"It is possible to narrow the nut end without narrowing the other end. The bridge end…"

Ronnie Nichols replied Dec 15, 2008 to traditional style 00-21 has too wide a neck

 12 Dec 26, 2008
Reply by mike carne

"This is definitely a repair that can be done. Since there is no binding to deal with…"

Ronnie Nichols replied Dec 15, 2008 to traditional style 00-21 has too wide a neck

 12 Dec 26, 2008
Reply by mike carne

"The braces can be scalloped through the sound hole. It takes some time and practice…"

Ronnie Nichols replied Dec 13, 2008 to tone problems

 5 Jan 16, 2009
Reply by Russell Vance

"Contrary to what I'd always assumed, thinner wood and bracing generally produces mor…"

Ronnie Nichols replied Dec 13, 2008 to tone problems

 5 Jan 16, 2009
Reply by Russell Vance

"There is at least one other alternative. You can epoxy those frets in the slots. I'm…"

Ronnie Nichols replied Dec 10, 2008 to Huge fret slots - what's the best way to snug them up?

 15 Jan 1, 2009
Reply by FRANK

"The little triangular fret spanner that Frank Ford mentions is a great little tool f…"

Ronnie Nichols replied Dec 6, 2008 to Leveling frets

 17 Mar 5, 2009
Reply by Jeffrey L. Suits

RSS

Members

© 2023   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service