FRETS.NET

Ronnie Nichols's Discussions (58)

Discussions Replied To (57) Replies Latest Activity

"I think you'll probably have to mix up a color. If there is a color that will match…"

Ronnie Nichols replied Dec 6, 2008 to Matching D-18 color

2 Dec 6, 2008
Reply by Ronnie Nichols

"A mandolin is one instrument that I have never built. I have built guitars, bass fid…"

Ronnie Nichols replied Dec 6, 2008 to mandolin nut spacing

17 Dec 19, 2008
Reply by Donald A. Fortune

"The simplest way would be to copy the spacing off an existing mandolin. Since mandol…"

Ronnie Nichols replied Dec 4, 2008 to mandolin nut spacing

17 Dec 19, 2008
Reply by Donald A. Fortune

"For a lot of years I refrained from using steel wool since I felt the Scotch Brite p…"

Ronnie Nichols replied Dec 2, 2008 to Polishing Frets

13 Dec 30, 2008
Reply by thefishinmusician

"I'd be concerned about the finish cracking from the cold. I've seen a lot of guitars…"

Ronnie Nichols replied Nov 29, 2008 to Heat Stress? What about cold?

15 Jan 28, 2009
Reply by Dave

"Jerry: An old carpenter once told me that the difference between a good carpenter an…"

Ronnie Nichols replied Nov 29, 2008 to Difficulty leveling Rosette

11 Nov 30, 2008
Reply by Bob Webster

"Those old "taterbug" mandolins are usually not worth a lot nor do they produce the s…"

Ronnie Nichols replied Nov 28, 2008 to How to flatten a badly warped mandolin top?

9 Jan 5, 2009
Reply by Ned Knepp

"The thinner you saw them, the quicker they will dry. I'd say around 1/4 inch (.250 i…"

Ronnie Nichols replied Nov 28, 2008 to Jumbo Guitar

2 Nov 28, 2008
Reply by Robert Mac Millan

"That is one of the great things about luthiery. These little problems always make yo…"

Ronnie Nichols replied Nov 28, 2008 to Difficulty leveling Rosette

11 Nov 30, 2008
Reply by Bob Webster

"I'll take a shot at answering this. The stains you find at the hardware store and ho…"

Ronnie Nichols replied Nov 27, 2008 to Finishing Curly Maple

9 Nov 29, 2008
Reply by Russell Vance

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service