FRETS.NET

Ronnie Nichols's Discussions (58)

Discussions Replied To (57) Replies Latest Activity

"Do him a favor and install a wooden bridge on it. I've seen some of the old Gibsons…"

Ronnie Nichols replied Oct 30, 2008 to Gluing a plastic bridge

6 Oct 30, 2008
Reply by Robert Filippi

"Your question is a good one. I'm sure Frank's Frets.com site probably addresses this…"

Ronnie Nichols replied Oct 25, 2008 to making bone nuts

6 Oct 26, 2008
Reply by jb

"I'd always assumed that the "L" on a Gibson referred to the old craftsman named Lloy…"

Ronnie Nichols replied Oct 20, 2008 to Little mysteries

10 Oct 20, 2008
Reply by Penql

"I think most everyone who has built an instrument can identify with what you're sayi…"

Ronnie Nichols replied Oct 20, 2008 to The Pain

11 Oct 28, 2008
Reply by Penql

"I haven't used any of the waterborne guitar finish. I am an old nitro lacquer spraye…"

Ronnie Nichols replied Oct 14, 2008 to Beginner question: Achieving a nice finish

12 Dec 12, 2008
Reply by Gary Nutt

"You might also try using a hand-held drill that is variable speed. This will give yo…"

Ronnie Nichols replied Oct 9, 2008 to Countersinking bridge pin holes

6 Oct 10, 2008
Reply by Matt Winfree

"I understand your reluctance to remove the back. I feel sure you could probably work…"

Ronnie Nichols replied Oct 8, 2008 to How to re-attach loose kerfed lining?

10 Oct 30, 2008
Reply by Jim Bancroft

"Doug: My first guitar rebuild was an old Kay that I purchased at a flea market aroun…"

Ronnie Nichols replied Oct 7, 2008 to Building My First Acoustic Guitar

15 Nov 3, 2008
Reply by Allen Sandberg

"The best information I've ever seen on anything about stringed instruments came from…"

Ronnie Nichols replied Oct 5, 2008 to Building My First Acoustic Guitar

15 Nov 3, 2008
Reply by Allen Sandberg

"You shouldn't need to change the spacing at the bridge end. A sixteenth inch or so c…"

Ronnie Nichols replied Oct 5, 2008 to New guitar or new neck?

11 Oct 7, 2008
Reply by Russell Vance

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service