FRETS.NET

Doc Rathwell's Discussions (80)

Discussions Replied To (79) Replies Latest Activity

"Thanks for those very kind words Paul. I hope to be of some help on this board and c…"

Doc Rathwell replied Jan 22, 2016 to Plek System

21 Apr 26, 2023
Reply by Casey Smith

"Thanks for the clarification on the Gibson factory. I don't know where I came up wit…"

Doc Rathwell replied Jan 22, 2016 to Frank: What year did the Chicago/U.S. Manufacturers start bracing for steel strings?

10 Aug 31, 2020
Reply by el squir

"Well, I'm not Frank but just to help...if I can; I believe the Larson Bros had devel…"

Doc Rathwell replied Jan 21, 2016 to Frank: What year did the Chicago/U.S. Manufacturers start bracing for steel strings?

10 Aug 31, 2020
Reply by el squir

"Thanks Hesh. I used to work for a company that made high-end woodworking tools and I…"

Doc Rathwell replied Jan 21, 2016 to Plek System

21 Apr 26, 2023
Reply by Casey Smith

"I'm aware you've stated the rattle is coming from the body but you also mentioned ad…"

Doc Rathwell replied Jan 19, 2016 to The infernal rattling!

5 Jan 20, 2016
Reply by Martin Bell

"I've been asked a lot about this machine. Having been at the bench for  dealers of M…"

Doc Rathwell replied Jan 19, 2016 to Plek System

21 Apr 26, 2023
Reply by Casey Smith

"The Stew Mac "Plug Cutter" from the "Guitar Screw Rescue Kit" can be purchased on it…"

Doc Rathwell replied Jan 18, 2016 to Small-diameter plug cutters?

19 Feb 5, 2016
Reply by Andrew

"Hi John,    These instruments were rather lightly braced and there may be a chance…"

Doc Rathwell replied Jan 13, 2016 to Washburn Model 1915 neck resetLooking to confirm that is should be under the 13th fret.

8 Jan 15, 2016
Reply by Paul Breen

"Hi John,    Yes, you should be safe with the 13th fret, standard dovetail. If you w…"

Doc Rathwell replied Jan 13, 2016 to Washburn Model 1915 neck resetLooking to confirm that is should be under the 13th fret.

8 Jan 15, 2016
Reply by Paul Breen

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service