FRETS.NET

Jay Lowe's Discussions (21)

Search Forum

View

Discussions Replied To (21) Replies Latest Activity

"Len: The local store sold one 8 or 10 years ago. The bridge came off shortly after.…"

Jay Lowe replied Mar 14, 2019 to Martin with alloy soundboard

 15 Feb 17, 2021
Reply by Brian Ostosh

"Dave - Over the years I've only done work on two Taks. One with a standard - albeit…"

Jay Lowe replied Jan 4, 2018 to Takamine Neck Reset

 2 Jan 4, 2018
Reply by Dave Domizi

"It seems like I've read of doing it thru the bolt hole but had forgotten it (as with…"

Jay Lowe replied May 29, 2017 to Martin 000-1 neck attatched by means of.....?

 13 May 29, 2017
Reply by Jay Lowe

"Yes. A bit narrower than a dovetail."

Jay Lowe replied May 28, 2017 to Martin 000-1 neck attatched by means of.....?

 13 May 29, 2017
Reply by Jay Lowe

"What Frank said. It may help a bit to plug the hole before you start steaming. I san…"

Jay Lowe replied May 28, 2017 to Martin 000-1 neck attatched by means of.....?

 13 May 29, 2017
Reply by Jay Lowe

"I've done several (between 5 & 10, didn't keep score). Never a problem. Although…"

Jay Lowe replied Jan 1, 2017 to Refretting a Micarta Fingerboard

 5 May 30, 2017
Reply by TKW

"A heating iron (shaped like a bridge plate), a moist rag (positioned between the bri…"

Jay Lowe replied Jul 12, 2011 to Tool for bridge plate removal

 11 Jul 16, 2011
Reply by Magnus Hultin

"This is one of those annoying things that is much easier to make worse than better.…"

Jay Lowe replied Jul 6, 2011 to Finish ? on the top of a Taylor.

 3 Jul 7, 2011
Reply by Benjamin Farr

"Either of the above mentioned methods will probably work, but if it were laying in f…"

Jay Lowe replied May 18, 2011 to What Kind of Glue Is This?

 5 May 18, 2011
Reply by Jay Lowe

"Alex:   I'm with Frank here. I've made two of these bridges over the last few years.…"

Jay Lowe replied Feb 21, 2011 to Gibson J100 with cracked bridge

 10 Feb 27, 2011
Reply by Chris Rochow

RSS

Members

© 2023   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service