FRETS.NET

Roger Häggström's Discussions (571)

Search Forum

View

Discussions Replied To (525) Replies Latest Activity

"I'm first with 14 mm :-)"

Roger Häggström replied Apr 13, 2018 to String height at bridge

 10 Apr 22, 2018
Reply by Mark A. Kane

"Looking one more time on the picture, the tenon is too short as George said. That lu…"

Roger Häggström replied Apr 5, 2018 to Set Neck to Bolt On Conversion

 7 Apr 5, 2018
Reply by Roger Häggström

"The tenon looks a bit thin. I would glue tight fitting shims to the tenon instead of…"

Roger Häggström replied Apr 4, 2018 to Set Neck to Bolt On Conversion

 7 Apr 5, 2018
Reply by Roger Häggström

"Even with big gaps in a sloppy dovetail, I can't see no reason not to use shims and…"

Roger Häggström replied Apr 3, 2018 to Set Neck to Bolt On Conversion

 7 Apr 5, 2018
Reply by Roger Häggström

"Check this out. Oxalic acid may do the trick.https://youtu.be/tViTWUL8Was"

Roger Häggström replied Apr 2, 2018 to how to clean a contaminated seam, before regluing?

 10 Apr 4, 2018
Reply by Dave Richard

"Since it's metal I would clean and solder it in place. You can also flatten the shaf…"

Roger Häggström replied Mar 30, 2018 to Vintage Tuner Repair

 5 Jul 12, 2018
Reply by Dave Hanna

"Yes, it's a minor improvement. I will keep doing like this simple because it's so qu…"

Roger Häggström replied Mar 29, 2018 to Nut cut

 7 Mar 30, 2018
Reply by Andrew

"I should have known, I kinda knew it. Well. I have laughed really hard many times wh…"

Roger Häggström replied Mar 29, 2018 to Nut cut

 7 Mar 30, 2018
Reply by Andrew

"My Google translate told me so... this one... "

Roger Häggström replied Mar 29, 2018 to Nut cut

 7 Mar 30, 2018
Reply by Andrew

"I haven't made a thread of that as far as I know (did I?). Did a search and got some…"

Roger Häggström replied Mar 18, 2018 to Best trim router for a saddle slotting jig

 26 Apr 13, 2018
Reply by Robbie Collins

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service