FRETS.NET

Roger Häggström's Discussions (571)

Discussions Replied To (525) Replies Latest Activity

"Since the top of the heel can be thin on an ice-cone heel, it may be a better option…"

Roger Häggström replied Jul 30, 2022 to Ice Cream Cone heel neck reset

5 Aug 11, 2022
Reply by onewent

"Thinking about it... cutting the slots from the top will give better separation, cut…"

Roger Häggström replied Jun 7, 2022 to Bridge Saddle String Break Angle

5 Jun 7, 2022
Reply by Roger Häggström

"Yes, cutting through from the bottom of the saddle, leaving a little bone on top to…"

Roger Häggström replied Jun 7, 2022 to Bridge Saddle String Break Angle

5 Jun 7, 2022
Reply by Roger Häggström

"You could try to cut, or almost cut, the saddle in 6 pieces - one piece for each str…"

Roger Häggström replied Jun 6, 2022 to Bridge Saddle String Break Angle

5 Jun 7, 2022
Reply by Roger Häggström

"The best result comes when you can drill the hole into the neck block/neck heel inst…"

Roger Häggström replied May 31, 2022 to Hot wire foam cutter for neck removal...

34 May 31, 2022
Reply by Roger Häggström

"I see a picture of a Levin mandolinguitar on the wall! Very rare."

Roger Häggström replied May 13, 2022 to Dating a vintage Washburn acoustic

24 May 22, 2022
Reply by Chris Vallillo

"I have seen a "kerfing" (with a lot of cuts in the spruce) topped with a thin layer…"

Roger Häggström replied May 9, 2022 to Old Gibson laminated top braces ?

3 May 10, 2022
Reply by thefishinmusician

"Well, no. I use it as a black base for black spirit varnish, I don't need it to pene…"

Roger Häggström replied Apr 25, 2022 to Blackening Wood Strips for Purfling?

10 May 1, 2022
Reply by Mark McLean

"The best one I've tried is Indian Ink, deep black with some shellac added."

Roger Häggström replied Apr 25, 2022 to Blackening Wood Strips for Purfling?

10 May 1, 2022
Reply by Mark McLean

"I'd go with the epoxy glue to give the guitar one last hurrah :-) I would try to add…"

Roger Häggström replied Apr 21, 2022 to Ovation rescue... Yes, I know...

6 Apr 23, 2022
Reply by Taffy Evans

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service