FRETS.NET

MrGlyn's Discussions (47)

Discussions Replied To (40) Replies Latest Activity

"Yea, works great for the 'ROCK' players to clean their humbuckers up using the vol.…"

MrGlyn replied Aug 26, 2008 to “Treble Bleed Mods”

4 Aug 28, 2008
Reply by .Simcha Delft

"You can do everything the same only its a bit tougher."

MrGlyn replied Aug 13, 2008 to Stainless Steel Fretwire...The Good, the Bad and the Ugly!

14 Nov 1, 2008
Reply by Mike Kolb

"Hey thanks - I was thinking it was hot enough to slip the glue joint. I'll have to t…"

MrGlyn replied Aug 13, 2008 to Neck Heaters to Straighten Necks?

9 Aug 13, 2008
Reply by MrGlyn

"I like your method Jim - a lot safer that heat lamps - but a couple of weeks? Seems…"

MrGlyn replied Aug 12, 2008 to Neck Heaters to Straighten Necks?

9 Aug 13, 2008
Reply by MrGlyn

"I've done maybe 10 fret jobs with it and yea its ok. A bit hard to cut but I charge…"

MrGlyn replied Aug 12, 2008 to Stainless Steel Fretwire...The Good, the Bad and the Ugly!

14 Nov 1, 2008
Reply by Mike Kolb

"I'll post a photo of the clamping I end up with."

MrGlyn replied Aug 7, 2008 to Ovation Neck Re-set

12 Dec 4, 2011
Reply by William F.Eden

"Ha ha yea seems like this is a job we all hate. Its one of the thinner bowl backs an…"

MrGlyn replied Aug 7, 2008 to Ovation Neck Re-set

12 Dec 4, 2011
Reply by William F.Eden

"Easy to say 'wear gloves' but in the heat of battle... Its funny but I always rememb…"

MrGlyn replied Aug 4, 2008 to Welcome to FRETS.NET

39 Oct 31, 2008
Reply by thefishinmusician

"Fantastic, there are so many myths out there, usually perpetuated by guys in guitar…"

MrGlyn replied Aug 2, 2008 to Welcome to FRETS.NET

39 Oct 31, 2008
Reply by thefishinmusician

"Hi Frank, How ya doin Mate? Well i was just surfing and found you. I'm a full time l…"

MrGlyn replied Aug 2, 2008 to Welcome to FRETS.NET

39 Oct 31, 2008
Reply by thefishinmusician

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service