'97 National Tricone neck reset - FRETS.NET2024-03-28T10:51:12Zhttp://fretsnet.ning.com/forum/topics/97-national-tricone-neck-reset?feed=yes&xn_auth=noThey are made to reset. Just…tag:fretsnet.ning.com,2011-11-24:2177249:Comment:788342011-11-24T10:09:04.923ZRon Frazierhttp://fretsnet.ning.com/profile/RonFrazier
<p>They are made to reset. Just like a old banjo. I have done many of them . Some easy and some lots of work.</p>
<p> </p>
<p>Ron</p>
<p>They are made to reset. Just like a old banjo. I have done many of them . Some easy and some lots of work.</p>
<p> </p>
<p>Ron</p> You should pm me your contact…tag:fretsnet.ning.com,2011-11-01:2177249:Comment:764502011-11-01T13:05:35.431Znathan clarkhttp://fretsnet.ning.com/profile/nathanclark
You should pm me your contact info, I'll refer you more of these jobs! The last time someone asked me to do this job I told them it would be time and materials, plus a $200 quality of life offset surcharge.
You should pm me your contact info, I'll refer you more of these jobs! The last time someone asked me to do this job I told them it would be time and materials, plus a $200 quality of life offset surcharge. I have never tried to separat…tag:fretsnet.ning.com,2011-10-30:2177249:Comment:764152011-10-30T16:25:25.528ZGreg Mirkenhttp://fretsnet.ning.com/profile/GregMirken
I have never tried to separate the neck and dowel at the heel. Trim the heel as you would for any other reset; trim the top side of the dowel to clear the soundwell, redrill for the endpin screw (you will also have to trim a little length off the dowel to match the amount you take off the heel) and shim it up solid.
I have never tried to separate the neck and dowel at the heel. Trim the heel as you would for any other reset; trim the top side of the dowel to clear the soundwell, redrill for the endpin screw (you will also have to trim a little length off the dowel to match the amount you take off the heel) and shim it up solid.