Advice on cleaning off ancient masking tape - FRETS.NET2024-03-28T22:01:02Zhttp://fretsnet.ning.com/forum/topics/advice-on-cleaning-off-ancient-masking-tape?commentId=2177249%3AComment%3A120755&feed=yes&xn_auth=noJohn,
You might try using a…tag:fretsnet.ning.com,2013-10-31:2177249:Comment:1206602013-10-31T19:22:08.841ZNed Knepphttp://fretsnet.ning.com/profile/NedKnepp
<p>John, </p>
<p> You might try using a razor blade with tape wrapped round each end of the blade( to raise it slightly above the surface) as a scraper to remove as much of the tape as possible after soaking it with naptha. If you're careful you shouldn't get too much into the original finish. Even if you do, I think you will need to do some touch up anyway given the age of this tape and the crack repair. </p>
<p>John, </p>
<p> You might try using a razor blade with tape wrapped round each end of the blade( to raise it slightly above the surface) as a scraper to remove as much of the tape as possible after soaking it with naptha. If you're careful you shouldn't get too much into the original finish. Even if you do, I think you will need to do some touch up anyway given the age of this tape and the crack repair. </p> John,
Naptha will help to lif…tag:fretsnet.ning.com,2013-10-31:2177249:Comment:1207592013-10-31T17:14:36.996ZJustinhttp://fretsnet.ning.com/profile/JustinGreen
<p>John,</p>
<p>Naptha will help to lift residue, but it looks like the tape has been on there long enough to react with the finish. Solvents in tape sometimes do that. If that's the case you will have a lot bigger job than just trying to remove tape residue. Of course, you have to remove the tape somehow, so naptha can't hurt.</p>
<p>John,</p>
<p>Naptha will help to lift residue, but it looks like the tape has been on there long enough to react with the finish. Solvents in tape sometimes do that. If that's the case you will have a lot bigger job than just trying to remove tape residue. Of course, you have to remove the tape somehow, so naptha can't hurt.</p> Thanks Don. That was my first…tag:fretsnet.ning.com,2013-10-31:2177249:Comment:1207552013-10-31T16:57:26.268ZJohn McDonaldhttp://fretsnet.ning.com/profile/JohnMcDonald
<p>Thanks Don. That was my first thought also. I tried working at the corners and sides of the tape with naphtha and wasn't getting much of a result so I stopped and made my original post. Maybe I should just try saturating it a bit more with the naphtha. </p>
<p>Thanks Don. That was my first thought also. I tried working at the corners and sides of the tape with naphtha and wasn't getting much of a result so I stopped and made my original post. Maybe I should just try saturating it a bit more with the naphtha. </p> Lighter fluid (naptha) works…tag:fretsnet.ning.com,2013-10-31:2177249:Comment:1209022013-10-31T09:39:35.232ZDon Wisniewskihttp://fretsnet.ning.com/profile/DonWisniewski
<p>Lighter fluid (naptha) works very well for taking off the old tape residue. And won't damage the finish.</p>
<p>Lighter fluid (naptha) works very well for taking off the old tape residue. And won't damage the finish.</p>