Bar Fret Question - FRETS.NET2024-03-29T04:49:21Zhttp://fretsnet.ning.com/forum/topics/bar-fret-question?commentId=2177249%3AComment%3A54110&feed=yes&xn_auth=noStew-Mac has a nifty 'pliers'…tag:fretsnet.ning.com,2011-03-28:2177249:Comment:542232011-03-28T06:59:32.793ZChris Rochowhttp://fretsnet.ning.com/profile/ChrisRochow
Stew-Mac has a nifty 'pliers' used to add tang barbs... I love it!
Stew-Mac has a nifty 'pliers' used to add tang barbs... I love it! I have a small cross pein aut…tag:fretsnet.ning.com,2011-03-28:2177249:Comment:541102011-03-28T04:48:36.414ZHoward Klepperhttp://fretsnet.ning.com/profile/HowardKlepper
I have a small cross pein automotive bodywork hammer that I ground to a sharp edge on the pein. Much easier to use than a separate hammer and chisel.
I have a small cross pein automotive bodywork hammer that I ground to a sharp edge on the pein. Much easier to use than a separate hammer and chisel. Thanks Greg, that is helpful.…tag:fretsnet.ning.com,2011-03-27:2177249:Comment:541912011-03-27T01:53:43.401ZJim Bancrofthttp://fretsnet.ning.com/profile/JimBancroft
<p>Thanks Greg, that is helpful.</p>
<p> </p>
<p>Jim</p>
<p>Thanks Greg, that is helpful.</p>
<p> </p>
<p>Jim</p> I've seen bar frets both with…tag:fretsnet.ning.com,2011-03-26:2177249:Comment:540892011-03-26T20:11:52.616ZGreg Mirkenhttp://fretsnet.ning.com/profile/GregMirken
I've seen bar frets both with and without barbs. If your fit is tight I'd say unnecessary. I ground a vee on a file near the end and use it like a hatchet to beat barbs into bar fretwire.
I've seen bar frets both with and without barbs. If your fit is tight I'd say unnecessary. I ground a vee on a file near the end and use it like a hatchet to beat barbs into bar fretwire.