Brace radius jig - FRETS.NET2024-03-28T08:33:34Zhttp://fretsnet.ning.com/forum/topics/brace-radius-jig?feed=yes&xn_auth=no1. Using a plane results in…tag:fretsnet.ning.com,2019-11-01:2177249:Comment:1889922019-11-01T17:25:15.065ZRedactedhttp://fretsnet.ning.com/profile/Redacted
<p>1. Using a plane results in a superior gluing surface.</p>
<p>2. I can't see how a table saw could be anymore accurate that a properly constructed and spec'd jig.</p>
<p>3. See number one.</p>
<p></p>
<p></p>
<p>1. Using a plane results in a superior gluing surface.</p>
<p>2. I can't see how a table saw could be anymore accurate that a properly constructed and spec'd jig.</p>
<p>3. See number one.</p>
<p></p>
<p></p> Now take your idea and build…tag:fretsnet.ning.com,2019-10-30:2177249:Comment:1888992019-10-30T12:48:54.806Zsylvanhttp://fretsnet.ning.com/profile/sylvan
<p>Now take your idea and build a jig that will use it with the table saw. Much quicker and even more accurate. It is how I cut my braces over the last fifteen years.</p>
<p>Now take your idea and build a jig that will use it with the table saw. Much quicker and even more accurate. It is how I cut my braces over the last fifteen years.</p> Yes, i'ts a bit out of the bo…tag:fretsnet.ning.com,2019-10-29:2177249:Comment:1888952019-10-29T20:47:07.268ZRoger Häggströmhttp://fretsnet.ning.com/profile/RogerHaeggstroem
<p>Yes, i'ts a bit out of the box and a mirror image of what you normally do! But it does work. The bottom of the brace is always perfectly 90 degrees and with a really sharp plane the surface will be like a mirror. Will give the HHG the best possible surface if the top/bottom is also scraped shiny and flat.</p>
<p>Yes, i'ts a bit out of the box and a mirror image of what you normally do! But it does work. The bottom of the brace is always perfectly 90 degrees and with a really sharp plane the surface will be like a mirror. Will give the HHG the best possible surface if the top/bottom is also scraped shiny and flat.</p> Roger, I really like your jig…tag:fretsnet.ning.com,2019-10-29:2177249:Comment:1887012019-10-29T20:34:37.213ZGeorge Robertshttp://fretsnet.ning.com/profile/GeorgeRoberts
<p>Roger, I really like your jig. An elegant solution that at first glance (to me) seemed backwards, but that makes it all the more interesting.</p>
<p>Roger, I really like your jig. An elegant solution that at first glance (to me) seemed backwards, but that makes it all the more interesting.</p>