Braided piezo pickup - FRETS.NET2024-03-29T10:32:26Zhttp://fretsnet.ning.com/forum/topics/braided-piezo-pickup?feed=yes&xn_auth=nothese are very common and can…tag:fretsnet.ning.com,2021-02-11:2177249:Comment:2678182021-02-11T21:53:12.649Zwood addicthttp://fretsnet.ning.com/profile/Beerent
<p>these are very common and can be had from fishman. i dont think its something they advertise but it is available as i have replaced them before. try drilling the hole at a 45 like someone stated. then since it was installed before you can tell which way was facing the strings? if you can, rotate it 90*in the slot where the area that was facing the string is now facing the headstock or the tail. install the saddle with the p/u rotated. if the pickup was grounding out from the string pressure…</p>
<p>these are very common and can be had from fishman. i dont think its something they advertise but it is available as i have replaced them before. try drilling the hole at a 45 like someone stated. then since it was installed before you can tell which way was facing the strings? if you can, rotate it 90*in the slot where the area that was facing the string is now facing the headstock or the tail. install the saddle with the p/u rotated. if the pickup was grounding out from the string pressure causing a short this will get you down the road, but it really needs to be replaced. sometimes this works, sometimes not, but it is worth a try right? good luck</p> Agreed with all the answers,…tag:fretsnet.ning.com,2021-02-10:2177249:Comment:2669792021-02-10T12:12:52.216ZGiorgio Castaldihttp://fretsnet.ning.com/profile/GiorgioCastaldi
<p>Agreed with all the answers, I used over 10 of them in Flamenco guitars during the past year and they were kind of okay, the best way and clear sound for my experience was like Eric recommended being careful to not compromise any bracing.<br/> Another option is to use the length that you need to fill the bridge groove and leave the rest well fastened inside the guitar if a hole is not an option.</p>
<p>Agreed with all the answers, I used over 10 of them in Flamenco guitars during the past year and they were kind of okay, the best way and clear sound for my experience was like Eric recommended being careful to not compromise any bracing.<br/> Another option is to use the length that you need to fill the bridge groove and leave the rest well fastened inside the guitar if a hole is not an option.</p> But not too shallow an angle,…tag:fretsnet.ning.com,2021-02-08:2177249:Comment:2659212021-02-08T05:58:20.743ZGreg Mirkenhttp://fretsnet.ning.com/profile/GregMirken
<p>But not <em>too</em> shallow an angle, lest you drill into the X brace... I've seen that.</p>
<p></p>
<p>But not <em>too</em> shallow an angle, lest you drill into the X brace... I've seen that.</p>
<p></p> I posted in one of the luthie…tag:fretsnet.ning.com,2021-02-07:2177249:Comment:2658822021-02-07T23:01:10.622ZEric Gleasonhttp://fretsnet.ning.com/profile/EricGleason
<p>I posted in one of the luthier groups on facebook as well, and someone gave me the answer. The hole for the pickup needs to be drilled at about a 45 degree angle, and the edge of the hole needs to be rounded to avoid pinching and damaging the pickup.</p>
<p>Here's a pic from LR Baggs' instructions.…</p>
<p></p>
<p><a href="https://storage.ning.com/topology/rest/1.0/file/get/8530039488?profile=original" rel="noopener" target="_blank"><img class="align-full" src="https://storage.ning.com/topology/rest/1.0/file/get/8530039488?profile=RESIZE_710x"></img></a></p>
<p>I posted in one of the luthier groups on facebook as well, and someone gave me the answer. The hole for the pickup needs to be drilled at about a 45 degree angle, and the edge of the hole needs to be rounded to avoid pinching and damaging the pickup.</p>
<p>Here's a pic from LR Baggs' instructions.</p>
<p></p>
<p><a href="https://storage.ning.com/topology/rest/1.0/file/get/8530039488?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/8530039488?profile=RESIZE_710x" class="align-full"/></a></p> Or if you want to use this ty…tag:fretsnet.ning.com,2021-02-07:2177249:Comment:2655762021-02-07T22:40:22.533ZLen Biglinhttp://fretsnet.ning.com/profile/LenBiglin
<p>Or if you want to use this type of pickup , drill the hole on a gentle slope so the bend is subtle , and as Greg said a blind hole at the other end to take the lump . But that one is probably had it .</p>
<p>Or if you want to use this type of pickup , drill the hole on a gentle slope so the bend is subtle , and as Greg said a blind hole at the other end to take the lump . But that one is probably had it .</p> I’m afraid the response to yo…tag:fretsnet.ning.com,2021-02-07:2177249:Comment:2655592021-02-07T20:21:10.964ZGreg Mirkenhttp://fretsnet.ning.com/profile/GregMirken
I’m afraid the response to your question reflects the enthusiasm for this type of pickup. No, you can’t trim it without shorting it out. You should drill a hole at the far end of the saddle slot to fit the lump at the end.<br />
Best procedure would be to trash it and install a K&K or similar unit, IMO.
I’m afraid the response to your question reflects the enthusiasm for this type of pickup. No, you can’t trim it without shorting it out. You should drill a hole at the far end of the saddle slot to fit the lump at the end.<br />
Best procedure would be to trash it and install a K&K or similar unit, IMO.