Drying by heat before glueing? - FRETS.NET2024-03-29T08:19:43Zhttp://fretsnet.ning.com/forum/topics/drying-by-heat-before-glueing?feed=yes&xn_auth=noYes, expensive. Had to order…tag:fretsnet.ning.com,2018-07-25:2177249:Comment:1797172018-07-25T18:09:16.740ZRoger Häggströmhttp://fretsnet.ning.com/profile/RogerHaeggstroem
<p>Yes, expensive. Had to order one and I just did. I HOPE this will be a great addition to the workshop.</p>
<p>Yes, expensive. Had to order one and I just did. I HOPE this will be a great addition to the workshop.</p> Makes sense.
When you think…tag:fretsnet.ning.com,2018-07-23:2177249:Comment:1796342018-07-23T17:16:11.539ZMurray MacLeodhttp://fretsnet.ning.com/profile/MurrayMacLeod
<p>Makes sense. </p>
<p>When you think about it, all that matters is that the woods used in the bracing of the top, back and sides should be between 40% - 50% RH when they are being glued, with a similar RH when the box is closed.</p>
<p>What the humidity in the rest of the shop might be during sawing, and planing operations is irrelevant..</p>
<p>Keeping the parts in a cabinet such as the one shown above would certainly be one way to achieve this.</p>
<p>They are not cheap however. The one…</p>
<p>Makes sense. </p>
<p>When you think about it, all that matters is that the woods used in the bracing of the top, back and sides should be between 40% - 50% RH when they are being glued, with a similar RH when the box is closed.</p>
<p>What the humidity in the rest of the shop might be during sawing, and planing operations is irrelevant..</p>
<p>Keeping the parts in a cabinet such as the one shown above would certainly be one way to achieve this.</p>
<p>They are not cheap however. The one shown above retails in GB at almost £400 GBP</p>
<p></p>
<p> </p>