Guild F512 Neck Set - FRETS.NET2024-03-29T15:13:01Zhttp://fretsnet.ning.com/forum/topics/guild-f512-neck-set?commentId=2177249%3AComment%3A186024&x=1&feed=yes&xn_auth=noThank you Alex. I don't have…tag:fretsnet.ning.com,2019-08-03:2177249:Comment:1860242019-08-03T02:24:20.154ZThomas Jameshttp://fretsnet.ning.com/profile/ThomasJames
Thank you Alex. I don't have that tool, but I should give it a go. Reviews have encouraging.
Thank you Alex. I don't have that tool, but I should give it a go. Reviews have encouraging. Use the cartridge heater/heat…tag:fretsnet.ning.com,2019-07-31:2177249:Comment:1860152019-07-31T21:56:41.940ZAlex Glasserhttp://fretsnet.ning.com/profile/AlexGlasser
<p>Use the cartridge heater/heatstick . and water. there is a ton of hide glue like frank said. it needs heat and moisture to let go. like 30-60 minutes. the steam is too inefficient and causes finish problem. they are faced glued too and finished over so make sure that joint is free as well as the dovetail</p>
<p>Use the cartridge heater/heatstick . and water. there is a ton of hide glue like frank said. it needs heat and moisture to let go. like 30-60 minutes. the steam is too inefficient and causes finish problem. they are faced glued too and finished over so make sure that joint is free as well as the dovetail</p> Thanks Gary. I did six string…tag:fretsnet.ning.com,2019-07-29:2177249:Comment:1858182019-07-29T17:47:40.691ZThomas Jameshttp://fretsnet.ning.com/profile/ThomasJames
Thanks Gary. I did six string Guild a few years back. It was a sloppy but stubborn joint. And yes the binding is loose all along the neck. Waiting on the owner to decide whether he wants to spend the money.
Thanks Gary. I did six string Guild a few years back. It was a sloppy but stubborn joint. And yes the binding is loose all along the neck. Waiting on the owner to decide whether he wants to spend the money. Yes, it's Bill Monroe's signa…tag:fretsnet.ning.com,2019-07-29:2177249:Comment:1860122019-07-29T17:44:12.934ZThomas Jameshttp://fretsnet.ning.com/profile/ThomasJames
Yes, it's Bill Monroe's signature. There are pictures of the signing in the case.
Yes, it's Bill Monroe's signature. There are pictures of the signing in the case. I took one of these on years…tag:fretsnet.ning.com,2019-07-28:2177249:Comment:1857292019-07-28T16:15:47.295ZGary Friedhttp://fretsnet.ning.com/profile/GaryFried
<p>I took one of these on years ago. While it was a regular dovetail, it required an extraordinary amount of steam to release. I also had the problem of the binding coming off at the side dot markers when loosening the fingerboard over the body. I can see in your pictures that the binding has some cracks propagating from the side dots on the 15th and 17th frets, so you may end up with the same problem. Good luck!</p>
<p>I took one of these on years ago. While it was a regular dovetail, it required an extraordinary amount of steam to release. I also had the problem of the binding coming off at the side dot markers when loosening the fingerboard over the body. I can see in your pictures that the binding has some cracks propagating from the side dots on the 15th and 17th frets, so you may end up with the same problem. Good luck!</p> OK. Better make sure that yo…tag:fretsnet.ning.com,2019-07-28:2177249:Comment:1860052019-07-28T11:27:47.611ZMark McLeanhttp://fretsnet.ning.com/profile/MarkMcLean
<p>OK. Better make sure that you don't refinish that top!</p>
<p></p>
<p>OK. Better make sure that you don't refinish that top!</p>
<p></p> I did the same thing. I wonde…tag:fretsnet.ning.com,2019-07-27:2177249:Comment:1857172019-07-27T16:28:27.515ZLee Gendvilashttp://fretsnet.ning.com/profile/leegendvilas
<p>I did the same thing. I wonder if...</p>
<p>I did the same thing. I wonder if...</p> I swear it looks like "Bill…tag:fretsnet.ning.com,2019-07-27:2177249:Comment:1857122019-07-27T14:34:41.993ZMike Kolbhttp://fretsnet.ning.com/profile/MikeKolb
<p></p>
<p>I swear it looks like "Bill Monroe" to these old eyes....</p>
<p></p>
<p><a href="https://storage.ning.com/topology/rest/1.0/file/get/3388138269?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/3388138269?profile=RESIZE_710x" class="align-full"/></a></p>
<p></p>
<p></p>
<p>I swear it looks like "Bill Monroe" to these old eyes....</p>
<p></p>
<p><a href="https://storage.ning.com/topology/rest/1.0/file/get/3388138269?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/3388138269?profile=RESIZE_710x" class="align-full"/></a></p>
<p></p> Yes, but the important questi…tag:fretsnet.ning.com,2019-07-27:2177249:Comment:1857082019-07-27T10:51:53.161ZMark McLeanhttp://fretsnet.ning.com/profile/MarkMcLean
<p>Yes, but the important question is whose signature is that on the top?</p>
<p>Yes, but the important question is whose signature is that on the top?</p> Thank you, Frank. I guess I w…tag:fretsnet.ning.com,2019-07-23:2177249:Comment:1859042019-07-23T23:53:08.314ZThomas Jameshttp://fretsnet.ning.com/profile/ThomasJames
Thank you, Frank. I guess I will take it on. The bridge is off and shaved way too low.
Thank you, Frank. I guess I will take it on. The bridge is off and shaved way too low.