how to clean a contaminated seam, before regluing? - FRETS.NET2024-03-29T12:54:04Zhttp://fretsnet.ning.com/forum/topics/how-to-clean-a-contaminated-seam-before-regluing?commentId=2177249%3AComment%3A177720&feed=yes&xn_auth=noGeorge, thanks, that's excell…tag:fretsnet.ning.com,2018-04-04:2177249:Comment:1779882018-04-04T17:40:17.547ZDave Richardhttp://fretsnet.ning.com/profile/DaveRichard983
<p>George, thanks, that's excellent, and I'm familiar with Brownell's.<br/> <br/> Paul, I think there has been some water/humidity exposure, but the owner stated she bought the guitar 'new', as a second, because of the checking(i.e. it started right after finishing).</p>
<p>George, thanks, that's excellent, and I'm familiar with Brownell's.<br/> <br/> Paul, I think there has been some water/humidity exposure, but the owner stated she bought the guitar 'new', as a second, because of the checking(i.e. it started right after finishing).</p> There is a material called "w…tag:fretsnet.ning.com,2018-04-04:2177249:Comment:1778252018-04-04T17:05:26.225ZGeorge Robertshttp://fretsnet.ning.com/profile/GeorgeRoberts
<p>There is a material called "whiting" that is sold specifically to remove oil and grease from wood. It is most often used by the gun trade because gun stocks get lots of exposure to oil and grease. The whiting itself is finely ground calcium carbonate which is basically chalk, and pretty harmless. It is, however, mixed with 1,1,1 Trichloroethane, which should probably be used outdoors, or with good ventilation. The mixture is a paste, about the consistency of "pancake batter." The…</p>
<p>There is a material called "whiting" that is sold specifically to remove oil and grease from wood. It is most often used by the gun trade because gun stocks get lots of exposure to oil and grease. The whiting itself is finely ground calcium carbonate which is basically chalk, and pretty harmless. It is, however, mixed with 1,1,1 Trichloroethane, which should probably be used outdoors, or with good ventilation. The mixture is a paste, about the consistency of "pancake batter." The Trichloroethane dissolves the oil and allows it to wick into the calcium carbonate. Once the Trichloroethane has evaporated, the procedure is repeated until the calcium carbonate shows no further staining.</p>
<p>My whiting came from Brownells. Inc. Montezuma, Iowa.</p>
<p></p> https://www.shellac.net/dewax…tag:fretsnet.ning.com,2018-04-03:2177249:Comment:1776802018-04-03T18:47:46.458ZDave Hannahttp://fretsnet.ning.com/profile/Calamity_Crippen
<p><a href="https://www.shellac.net/dewaxer_741.html" target="_blank">https://www.shellac.net/dewaxer_741.html</a></p>
<p><a href="https://www.shellac.net/dewaxer_741.html" target="_blank">https://www.shellac.net/dewaxer_741.html</a></p> Just spitballing here, but wh…tag:fretsnet.ning.com,2018-04-03:2177249:Comment:1779112018-04-03T16:30:53.767ZRobbie Collinshttp://fretsnet.ning.com/profile/RobbieCollins
<p>Just spitballing here, but what about some type of soap? Maybe Fuller's Earth?</p>
<p>Just spitballing here, but what about some type of soap? Maybe Fuller's Earth?</p> I think the options are limit…tag:fretsnet.ning.com,2018-04-03:2177249:Comment:1776752018-04-03T16:08:34.160ZPaul Breenhttp://fretsnet.ning.com/profile/PaulBreen
<p>I think the options are limited. The Behlen's 714 is worth a shot but cutting out the contaminated wood and patching in new is likely the most sure fire.</p>
<p>To my knowledge, Oxalic Acid will only remove mineral stains.</p>
<p>The finish damage looks like water/ high humidity damage to me, maybe from storage in a very damp place like a basement, while in a case.</p>
<p></p>
<p>I think the options are limited. The Behlen's 714 is worth a shot but cutting out the contaminated wood and patching in new is likely the most sure fire.</p>
<p>To my knowledge, Oxalic Acid will only remove mineral stains.</p>
<p>The finish damage looks like water/ high humidity damage to me, maybe from storage in a very damp place like a basement, while in a case.</p>
<p></p> https://www.shellac.net/dewax…tag:fretsnet.ning.com,2018-04-03:2177249:Comment:1779062018-04-03T15:45:55.221ZMike Kolbhttp://fretsnet.ning.com/profile/MikeKolb
<p><a href="https://www.shellac.net/dewaxer_741.html" target="_blank">https://www.shellac.net/dewaxer_741.html</a></p>
<p><a href="https://www.shellac.net/dewaxer_741.html" target="_blank">https://www.shellac.net/dewaxer_741.html</a></p> Thanks for your replies and s…tag:fretsnet.ning.com,2018-04-03:2177249:Comment:1777202018-04-03T12:51:58.962ZDave Richardhttp://fretsnet.ning.com/profile/DaveRichard983
<p>Thanks for your replies and suggestions. Dave, the Behlen's 714 does not come up for me on a google search- have you bought it recently, or know of a source?</p>
<p>Rob, your point is well taken, sometimes it's better to decline...I have considered, that it may be necessary to remove the contaminated wood, to get rid of the oil. If I take it on, it will be time and materials.</p>
<p></p>
<p>Thanks for your replies and suggestions. Dave, the Behlen's 714 does not come up for me on a google search- have you bought it recently, or know of a source?</p>
<p>Rob, your point is well taken, sometimes it's better to decline...I have considered, that it may be necessary to remove the contaminated wood, to get rid of the oil. If I take it on, it will be time and materials.</p>
<p></p> Sometimes it pays to be selec…tag:fretsnet.ning.com,2018-04-03:2177249:Comment:1777172018-04-03T00:07:56.294ZRob Bixlerhttp://fretsnet.ning.com/profile/RobBixler
<p>Sometimes it pays to be selective about which jobs one accepts. If success is low probability better to pass on the job. If I were to tackle this, I might seriously consider removing wood along the edges of the crack and putting in a splice. But, then again, I would just pass on the job.</p>
<p>Sometimes it pays to be selective about which jobs one accepts. If success is low probability better to pass on the job. If I were to tackle this, I might seriously consider removing wood along the edges of the crack and putting in a splice. But, then again, I would just pass on the job.</p> Check this out. Oxalic acid m…tag:fretsnet.ning.com,2018-04-02:2177249:Comment:1776692018-04-02T20:33:24.893ZRoger Häggströmhttp://fretsnet.ning.com/profile/RogerHaeggstroem
<p>Check this out. Oxalic acid may do the trick.<br/><br/><a rel="nofollow noopener" href="https://youtu.be/tViTWUL8Was" target="_blank">https://youtu.be/tViTWUL8Was</a><a rel="nofollow noopener" href="https://www.youtube.com/watch?v=tViTWUL8Was" target="_blank"></a></p>
<p>Check this out. Oxalic acid may do the trick.<br/><br/><a rel="nofollow noopener" href="https://youtu.be/tViTWUL8Was" target="_blank">https://youtu.be/tViTWUL8Was</a><a rel="nofollow noopener" href="https://www.youtube.com/watch?v=tViTWUL8Was" target="_blank"></a></p> Try Behlen's 741 Oil and Wax…tag:fretsnet.ning.com,2018-04-02:2177249:Comment:1776662018-04-02T19:05:08.616ZDave Hannahttp://fretsnet.ning.com/profile/Calamity_Crippen
Try Behlen's 741 Oil and Wax remover. Use it outside away from flame. Don't breath the fumes. If used outside you can really soak it into the crack. It evaporates quickly. Use a brush and paper towels to wick out the mess.<br />
<br />
It should not affect Lacquer, but test a little spot to make sure.
Try Behlen's 741 Oil and Wax remover. Use it outside away from flame. Don't breath the fumes. If used outside you can really soak it into the crack. It evaporates quickly. Use a brush and paper towels to wick out the mess.<br />
<br />
It should not affect Lacquer, but test a little spot to make sure.