Neck reset and compression fretting - FRETS.NET2024-03-29T05:58:41Zhttp://fretsnet.ning.com/forum/topics/neck-reset-and-compression-fretting?feed=yes&xn_auth=noIMO iwould def do the refret…tag:fretsnet.ning.com,2021-12-29:2177249:Comment:2829542021-12-29T17:18:48.257Zwood addicthttp://fretsnet.ning.com/profile/Beerent
<p>IMO iwould def do the refret after the reset is complete. as well as everything may look spot on, you never know what is going to happen once glue and clamps are introduced into the situation. if you do a spectacular fret job, then do the reset, you'll end up doing fret leveling and recrowning at the body/neck joint when this could have been taken care of by leveling the fingerboard THEN doing the refret. just my 2cents. good luck</p>
<p>IMO iwould def do the refret after the reset is complete. as well as everything may look spot on, you never know what is going to happen once glue and clamps are introduced into the situation. if you do a spectacular fret job, then do the reset, you'll end up doing fret leveling and recrowning at the body/neck joint when this could have been taken care of by leveling the fingerboard THEN doing the refret. just my 2cents. good luck</p>