FRETS.NET

Ned Knepp's Discussions (1,791)

Discussions Replied To (1780) Replies Latest Activity

"I wondered about that too Greg. I also have some reservations about his thoughts on…"

Ned Knepp replied Sep 23, 2010 to Graduated fingerboard relief and radius

12 Sep 24, 2010
Reply by Ned Knepp

"Interesting article, Bob, but I must say that you presenting it here then requesting…"

Ned Knepp replied Sep 23, 2010 to Graduated fingerboard relief and radius

12 Sep 24, 2010
Reply by Ned Knepp

"Geoff, It looks like the plate is plywood with the wear through the top layer. Is th…"

Ned Knepp replied Sep 23, 2010 to bulging soundboard

23 Aug 28, 2015
Reply by Frank Karau

"The whole "made in a couple of different places so we don't know...." bit says a lot…"

Ned Knepp replied Sep 23, 2010 to Newbie

56 Oct 10, 2010
Reply by Evan Bradley

"If you really want to try it that's a fairly decent representation of the process. O…"

Ned Knepp replied Sep 22, 2010 to Newbie

56 Oct 10, 2010
Reply by Evan Bradley

"I saw a cross grain break like this repaired with two scarf joint cuts and a segment…"

Ned Knepp replied Sep 21, 2010 to Newbie

56 Oct 10, 2010
Reply by Evan Bradley

"The missing wood in the bridge plate along with wear in the top from the string ball…"

Ned Knepp replied Sep 21, 2010 to bulging soundboard

23 Aug 28, 2015
Reply by Frank Karau

"Have the braces distorted along with the top? What about the condition of the bridge…"

Ned Knepp replied Sep 20, 2010 to bulging soundboard

23 Aug 28, 2015
Reply by Frank Karau

"On a steel string flat top guitar, half the job of bracing is to keep the instrument…"

Ned Knepp replied Sep 20, 2010 to bulging soundboard

23 Aug 28, 2015
Reply by Frank Karau

"Does it go sharp or flat and what is the setup like? Is it setup for med. strings?…"

Ned Knepp replied Sep 18, 2010 to Taylor 410 Intonating Improperly

3 Sep 19, 2010
Reply by Christian Johnson

RSS

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service