FRETS.NET

Greg Mirken's Discussions (636)

Search Forum

View

Discussions Replied To (634) Replies Latest Activity

"T.J. is indeed the man for an accurate, period specific bridge. There's a small comp…"

Greg Mirken replied Sep 11, 2018 to Martin Matters.

 16 Sep 13, 2018
Reply by onewent

"Well, not so sure about the guard. Is it under the finish? May have been removed and…"

Greg Mirken replied Sep 9, 2018 to Martin Matters.

 16 Sep 13, 2018
Reply by onewent

"Early 1940. Bridge not original, pickguard not original. Strings might be original."

Greg Mirken replied Sep 9, 2018 to Martin Matters.

 16 Sep 13, 2018
Reply by onewent

"If I may clarify something, the fumes of curing CA are classed as an irritant. Neith…"

Greg Mirken replied Aug 12, 2018 to CA glue for construction

 7 Aug 21, 2018
Reply by Walter W Wright

"You have to determine how much you'd have to take off to get it flat. Certainly try…"

Greg Mirken replied Jul 30, 2018 to 12 string bridge reglue problem

 23 Aug 1, 2018
Reply by Bruce Erickson

"Don't sand the bridge to flatten it. I assume it pulled up behind the pins- sanding…"

Greg Mirken replied Jul 28, 2018 to 12 string bridge reglue problem

 23 Aug 1, 2018
Reply by Bruce Erickson

"I’ve never seen that particular oddball fretwire, but older low-end instruments so o…"

Greg Mirken replied Jun 15, 2018 to frets with continous barb?

 7 Jun 16, 2018
Reply by Danny Gadut

"The neck may not be overset. With a reset, a shaved-down bridge should be replaced.…"

Greg Mirken replied Apr 14, 2018 to String height at bridge

 10 Apr 22, 2018
Reply by Mark A. Kane

"On a new[ish] guitar? On a Martin with a medium bridge height it's just about 1/2" a…"

Greg Mirken replied Apr 13, 2018 to String height at bridge

 10 Apr 22, 2018
Reply by Mark A. Kane

"I have also used West System epoxies for as long as I can remember. We use pump cans…"

Greg Mirken replied Mar 12, 2018 to Fixing a new bridge to a damaged laminated top

 11 Mar 13, 2018
Reply by Alan Osborne

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service