FRETS.NET

Ron Frazier's Discussions (325)

Discussions Replied To (321) Replies Latest Activity

"Don't use Franklin hide glue!! I used it 50 years ago and things are still together…"

Ron Frazier replied Dec 14, 2009 to Franklin,s Hide Glue OK?

12 Dec 25, 2009
Reply by Michael Shaw

"The old Fender guitars cavity that the wiring is in was encased in a copper shield a…"

Ron Frazier replied Dec 12, 2009 to pick up noise

13 Dec 14, 2009
Reply by Len Biglin

"the bridge doctor is a fixture inside the guitar screwed to the the under side of th…"

Ron Frazier replied Dec 9, 2009 to adding a glued bridge to a flat top

55 Sep 17, 2013
Reply by Ned Knepp

"The top will distort with a glued bridge. It would fix the problem with that by usin…"

Ron Frazier replied Dec 9, 2009 to adding a glued bridge to a flat top

55 Sep 17, 2013
Reply by Ned Knepp

"don't and I say DONT heat it to much as the plastic is more than likely celoid and h…"

Ron Frazier replied Dec 8, 2009 to Softening plastic binding

6 Dec 8, 2009
Reply by Len Biglin

"I don't know if those old parlor guitars are worth doing that . If it is yours go fo…"

Ron Frazier replied Dec 8, 2009 to adding a glued bridge to a flat top

55 Sep 17, 2013
Reply by Ned Knepp

"I like the pin drill for pins. It is tapered and has the countersink. I also have ju…"

Ron Frazier replied Dec 8, 2009 to Martin Pin Hole DIA ?

5 Dec 8, 2009
Reply by Ron Frazier

"Looks like a dulcimer not made by a factory because it has a oval guitar fingerboard…"

Ron Frazier replied Dec 6, 2009 to Ever seen something like this?

8 Dec 7, 2009
Reply by Mark Riess

"I have always used a flrt top.. I glue it on the rims and then bind and then I sand…"

Ron Frazier replied Dec 4, 2009 to Radius of top braces before glueing...oops?

5 Dec 5, 2009
Reply by Michael Tulloch

"I have my 1948 000 18 Martin signed with Merle Haggard's band and it has stayed for…"

Ron Frazier replied Dec 2, 2009 to Protect autographed pickguard

6 Dec 2, 2009
Reply by Ron Frazier

RSS

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service