FRETS.NET

Russell Vance's Discussions (1,232)

Discussions Replied To (1220) Replies Latest Activity

"Even if dissolved in Coke and ice?   Gees, talk about a bad news week.  I'll have to…"

Russell Vance replied Oct 1, 2017 to Making the rosewood fretboard brown

8 Oct 1, 2017
Reply by Russell Vance

"Hi Roger, This has all the hallmarks of a solution looking for a problem.    The bar…"

Russell Vance replied Oct 1, 2017 to Barbless tang?

11 Oct 11, 2017
Reply by Roger Häggström

"I look after a couple of Charangos and their construction is rudimentary but sturdy…"

Russell Vance replied Aug 28, 2017 to Any luthier's out there have any pointers for charango

6 Aug 30, 2017
Reply by Markus Schmid

"Hi Lester, We have changed out Taylor necks for lesser evils than what you hear.   A…"

Russell Vance replied Aug 21, 2017 to "Sitar" sound on B string

28 Sep 25, 2017
Reply by Roger Häggström

"Hi Richard, hi all,  "Mixing quarter with flat sawn set's up stresses that are best…"

Russell Vance replied Aug 21, 2017 to Fingerboards

14 Aug 24, 2017
Reply by Mac McElwain

"HI Allen, What finish are you putting over the top of the grain filler?  The reason…"

Russell Vance replied Aug 14, 2017 to Black Grain Filler

17 Aug 29, 2017
Reply by Allen L Wall

"Hi Brian, Assuming you have drilled into a void associated with the truss rod you ma…"

Russell Vance replied Aug 13, 2017 to Fret Buzz

21 Aug 13, 2017
Reply by Brian Hemming

"Hi Roger, Now you are talking,  The question as to what nut material to use is drive…"

Russell Vance replied Aug 8, 2017 to Nut Materials??

30 Sep 16, 2017
Reply by Mike Kolb

"Ditto,  We have a Wadkin which looks like it arrived on the Arc, but it is also the…"

Russell Vance replied Aug 6, 2017 to Fender/Ernie ball Pin Router

5 Aug 7, 2017
Reply by Luke Single

"HI Brian, But, that was "the point" I made:   it's pointless knowing the frequency r…"

Russell Vance replied Aug 6, 2017 to Nut Materials??

30 Sep 16, 2017
Reply by Mike Kolb

RSS

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service