FRETS.NET

Ron Frazier's Discussions (325)

Search Forum

View

Discussions Replied To (321) Replies Latest Activity

"I have used a piece or two of silver solder. I don't remember the size of it tho. I…"

Ron Frazier replied Oct 17, 2009 to Where to aquire antique rectangular frets?

 9 Oct 17, 2009
Reply by Eric Steven Johansen

"I don't think they are wearing out. I think that the teeth are filling up with mate…"

Ron Frazier replied Oct 9, 2009 to Nut slotting files? Some better than others?

 8 Oct 10, 2009
Reply by Jeremy Borkat

"New one on me! I never knew there was a specific setting. and what is 12/32 of a inc…"

Ron Frazier replied Oct 6, 2009 to Argument with a luthier over distance of low E bridge pin hole from saddle

 6 Oct 7, 2009
Reply by William F.Eden

"About 50 years ago I bought one gallon of liquid hide glue and built every thing I b…"

Ron Frazier replied Sep 22, 2009 to Adhesives

 6 Sep 28, 2009
Reply by Tony Webber

"after 1970 USA was added to the back of the peg head. Vintage guitar says around 50…"

Ron Frazier replied Sep 14, 2009 to Age/Value question about a Gibson SG bass guitar

 7 Sep 16, 2009
Reply by Rob Mercure

"Any Gibson is worth repairing!! Sounds like the repair persons you have talked to ju…"

Ron Frazier replied Sep 7, 2009 to Looking for a Luthier - Central Florida

 13 Sep 13, 2009
Reply by Tim Mace

"The ones you have look like the open tuners. You have to pry the cap holders out and…"

Ron Frazier replied Sep 2, 2009 to kluson deluxe tuners

 12 Sep 22, 2009
Reply by steve reid

"I use one of those waffle phloem bed pad for under my guitars that I am working on.…"

Ron Frazier replied Sep 2, 2009 to Lessons from real customer experiences

 10 Sep 5, 2009
Reply by Kevin Swaim

"Good luck on the serial # !! I have been trying for some years. Some times they even…"

Ron Frazier replied Sep 1, 2009 to i bought my first Gibson classical what do you think ?

 11 Sep 4, 2009
Reply by FRANK

"I would have to read my agenda and it is in the shop as it is written on the side of…"

Ron Frazier replied Aug 30, 2009 to Bending wood with a Fox-style machine

 4 Nov 14, 2009
Reply by Gary Nutt

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service