FRETS.NET

Paul Breen's Discussions (450)

Search Forum

View

Discussions Replied To (439) Replies Latest Activity

"I have been using magnets for a while now, very successfully. Looking for a faster,…"

Paul Breen replied May 15, 2015 to re-gluing braces

 11 May 18, 2015
Reply by Paul Breen

"By far the easiest thing to do is cut the fret slots wider and re-fret it with easil…"

Paul Breen replied May 11, 2015 to Narrow Slot Fretwire

 8 May 14, 2015
Reply by Kerry Krishna

"Hey Ned, here is a simple way to control glue mess inside - if you have the back off…"

Paul Breen replied May 1, 2015 to Repair Gibson K-1 mandocello

 29 May 3, 2015
Reply by Bernie Daniel

"These images are from a different mandolin but with the same problem and therapy as…"

Paul Breen replied May 1, 2015 to Repair Gibson K-1 mandocello

 29 May 3, 2015
Reply by Bernie Daniel

"Bernie, it's a glue a bit process, clamp, wedge the adjacent area open slightly, inj…"

Paul Breen replied May 1, 2015 to Repair Gibson K-1 mandocello

 29 May 3, 2015
Reply by Bernie Daniel

"Ned is absolutely correct about the difficulties when it's time for the back to get…"

Paul Breen replied Apr 30, 2015 to Repair Gibson K-1 mandocello

 29 May 3, 2015
Reply by Bernie Daniel

"Thanks for elaborating on your archtop conversion, very tastefully done!"

Paul Breen replied Apr 29, 2015 to Repair Gibson K-1 mandocello

 29 May 3, 2015
Reply by Bernie Daniel

"I need to correct a miss-statement, I was typing faster than I was thinking. I said"…"

Paul Breen replied Apr 29, 2015 to Repair Gibson K-1 mandocello

 29 May 3, 2015
Reply by Bernie Daniel

"Bernie, some sagging on these old oval holes is to be expected and not necessarily a…"

Paul Breen replied Apr 28, 2015 to Repair Gibson K-1 mandocello

 29 May 3, 2015
Reply by Bernie Daniel

"In my opinion, there is another option to this problem, if the top isn't too bad lik…"

Paul Breen replied Apr 28, 2015 to Repair Gibson K-1 mandocello

 29 May 3, 2015
Reply by Bernie Daniel

RSS

Members

© 2026   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service