FRETS.NET

Andrew's Discussions (584)

Search Forum

View

Discussions Replied To (559) Replies Latest Activity

"Well, that depends on how much material is being replaced.. But first lets clarify…"

Andrew replied Jan 21, 2015 to Is It Possible to "Fill In" a Nut Slot to Start Over? UPDATE: Shaping the Nut Slot...

 36 Jan 22, 2015
Reply by Andrew

"Yeah baked maple is just sugar/rock maple thats been err... cooked. I imagine normal…"

Andrew replied Jan 20, 2015 to 21 screws to assembly my Stratocaster-like guitar

 12 Jan 21, 2015
Reply by Philip J. Hoffmann

"I sometimes wish I had one of these: http://www.leevalley.com/en/Wood/page.aspx?p=32…"

Andrew replied Jan 20, 2015 to 21 screws to assembly my Stratocaster-like guitar

 12 Jan 21, 2015
Reply by Philip J. Hoffmann

"Most of the time I use one of those little hand crank drills (a Stanley) for tiny pi…"

Andrew replied Jan 20, 2015 to 21 screws to assembly my Stratocaster-like guitar

 12 Jan 21, 2015
Reply by Philip J. Hoffmann

"I dont need to add any to the consensus on regluing the bridge, but Mark McLean is r…"

Andrew replied Jan 20, 2015 to Slightly lifting and warped bridge - should it be replaced now or later?

 16 Jan 21, 2015
Reply by Peter Poyser

"Ah, thankya. I wasnt quite certain what you meant by relieving the nut, but thats ab…"

Andrew replied Jan 19, 2015 to Is It Possible to "Fill In" a Nut Slot to Start Over? UPDATE: Shaping the Nut Slot...

 36 Jan 22, 2015
Reply by Andrew

"Could you describe for us (me?) this 'relieved arris at the end of the nut' perchanc…"

Andrew replied Jan 18, 2015 to Is It Possible to "Fill In" a Nut Slot to Start Over? UPDATE: Shaping the Nut Slot...

 36 Jan 22, 2015
Reply by Andrew

"Great advice, especially the part about relieving the bottom edges. The only thing…"

Andrew replied Jan 16, 2015 to Is It Possible to "Fill In" a Nut Slot to Start Over? UPDATE: Shaping the Nut Slot...

 36 Jan 22, 2015
Reply by Andrew

"Ive found that a lot of files have a little burr shape that will cut a notch shape i…"

Andrew replied Jan 16, 2015 to Is It Possible to "Fill In" a Nut Slot to Start Over? UPDATE: Shaping the Nut Slot...

 36 Jan 22, 2015
Reply by Andrew

"I would especially look for cracks right along the fingerboard extension. Sometimes…"

Andrew replied Jan 16, 2015 to Martin with sunken top

 15 Jan 18, 2015
Reply by Hesh Breakstone

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service