FRETS.NET

Donald A. Fortune's Discussions (493)

Search Forum

View

Discussions Replied To (465) Replies Latest Activity

"I have been following this post for a while and I'm wondering if the player discusse…"

Donald A. Fortune replied Aug 15, 2009 to Nut spacing tolerances

 26 Aug 15, 2009
Reply by Donald A. Fortune

"David - more than likely the truss rod has a channel that it sits in and is blind at…"

Donald A. Fortune replied Aug 15, 2009 to 1958 Gretsch 6196 ..weird trussrod!!! ADDED PICS!

 14 Aug 16, 2009
Reply by Len Biglin

"Hi David-- I'm wondering if the original install at the factory was done rite... I m…"

Donald A. Fortune replied Aug 14, 2009 to 1958 Gretsch 6196 ..weird trussrod!!! ADDED PICS!

 14 Aug 16, 2009
Reply by Len Biglin

"Hi Bart- the thing that some builders have about the 12 fret hitting the body exactl…"

Donald A. Fortune replied Aug 14, 2009 to Advise needed on assembling classical guitar

 13 Aug 14, 2009
Reply by Donald A. Fortune

"blush is good Bob-- shows something that I haven't done in a while :)"

Donald A. Fortune replied Aug 14, 2009 to Advise needed on assembling classical guitar

 13 Aug 14, 2009
Reply by Donald A. Fortune

"Hi Bart- This is the fellow that I mentioned in my post-- In my openion he is top sh…"

Donald A. Fortune replied Aug 12, 2009 to Advise needed on assembling classical guitar

 13 Aug 14, 2009
Reply by Donald A. Fortune

"Hi Jimmy-- If you wish to get rid of the box then let me know ok?? peace, Donald"

Donald A. Fortune replied Aug 10, 2009 to Locating A Neck

 8 Aug 18, 2009
Reply by Rob Mercure

"Hi Bart -- I just completed my first classical guitar but it was a body into the nec…"

Donald A. Fortune replied Aug 10, 2009 to Advise needed on assembling classical guitar

 13 Aug 14, 2009
Reply by Donald A. Fortune

"The post that I left is for the strings to be the same distance from center to cente…"

Donald A. Fortune replied Aug 6, 2009 to Nut spacing tolerances

 26 Aug 15, 2009
Reply by Donald A. Fortune

"Here's the way I take and make any nut that needs to be made.... First I measure the…"

Donald A. Fortune replied Aug 5, 2009 to Nut spacing tolerances

 26 Aug 15, 2009
Reply by Donald A. Fortune

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service