FRETS.NET

Mike Kolb's Discussions (1,104)

Search Forum

View

Discussions Replied To (1007) Replies Latest Activity

"Sounds like an interesting jig, Murray.... any chance of some pictures or a diagram? "

Mike Kolb replied Jan 22, 2015 to Tele lost mojo after neck tilted .

 12 Jan 24, 2015
Reply by Andrew

"I'd forgotten about the "General Tools" drill guide in a pinch.  If a drill press wa…"

Mike Kolb replied Jan 21, 2015 to 21 screws to assembly my Stratocaster-like guitar

 12 Jan 21, 2015
Reply by Philip J. Hoffmann

"After re-rereading the OP's post, he brings-up a pretty good idea:   So, the next ti…"

Mike Kolb replied Jan 20, 2015 to 21 screws to assembly my Stratocaster-like guitar

 12 Jan 21, 2015
Reply by Philip J. Hoffmann

"...and yet, so many factory guitars have the nuts glued-in on every available surfac…"

Mike Kolb replied Jan 16, 2015 to Is It Possible to "Fill In" a Nut Slot to Start Over? UPDATE: Shaping the Nut Slot...

 36 Jan 22, 2015
Reply by Andrew

"Thanks, Paul.... but, at my age, it's more like I'll SHUFFLE with it :)"

Mike Kolb replied Jan 15, 2015 to Is It Possible to "Fill In" a Nut Slot to Start Over? UPDATE: Shaping the Nut Slot...

 36 Jan 22, 2015
Reply by Andrew

"Here's a thought about nut slots, and maybe one reason why they don't end-up as perf…"

Mike Kolb replied Jan 15, 2015 to Is It Possible to "Fill In" a Nut Slot to Start Over? UPDATE: Shaping the Nut Slot...

 36 Jan 22, 2015
Reply by Andrew

"Luthiers Mercantile (lmii.com) sells a bone nut shim that will give you an additiona…"

Mike Kolb replied Jan 14, 2015 to Is It Possible to "Fill In" a Nut Slot to Start Over? UPDATE: Shaping the Nut Slot...

 36 Jan 22, 2015
Reply by Andrew

"Larry...  the short answer is 'yes'. This blurb is from the StewMac website  "

Mike Kolb replied Jan 13, 2015 to DIY String Spacing

 25 Jan 20, 2015
Reply by Hesh Breakstone

"I'm a big fan of the StewMac string spacing ruler.... use it every day and it's more…"

Mike Kolb replied Jan 13, 2015 to DIY String Spacing

 25 Jan 20, 2015
Reply by Hesh Breakstone

"Good info, Howard. I see where Fuller makes a delineation between brad-points intend…"

Mike Kolb replied Jan 9, 2015 to brad point drill bits

 10 Jan 9, 2015
Reply by Mike Kolb

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service