FRETS.NET

Paul Breen's Discussions (450)

Search Forum

View

Discussions Replied To (439) Replies Latest Activity

"Jim, Here is a link to the Stew Mac Dremel base. It works very well for inlay appli…"

Paul Breen replied Nov 16, 2009 to Dremel Plunge Router Base

 10 Nov 16, 2009
Reply by Russell Vance

"Jim, What kind of applications are you wanting to use a Dremmel/ Cochran plunge bas…"

Paul Breen replied Nov 16, 2009 to Dremel Plunge Router Base

 10 Nov 16, 2009
Reply by Russell Vance

"If the bracings are fine, but the bridge seems to be the problem and upon replaceme…"

Paul Breen replied Nov 13, 2009 to Top Problems on Gibson ES125

 3 Nov 13, 2009
Reply by Paul Breen

""My concern is that cutting that hole sacrificed the structural integrity of the top…"

Paul Breen replied Nov 12, 2009 to Top Problems on Gibson ES125

 3 Nov 13, 2009
Reply by Paul Breen

"Your welcome Griff. The dimensions given are not an absolute. There can be some plu…"

Paul Breen replied Nov 11, 2009 to Vega mandolin bridge specs

 7 Nov 11, 2009
Reply by Paul Breen

"I sketched up the bridge in ACAD and plotted an 8 1/2 X 11, full scale PDF of it. Wh…"

Paul Breen replied Nov 11, 2009 to Vega mandolin bridge specs

 7 Nov 11, 2009
Reply by Paul Breen

"One more picture. Here is a link that may be useful as well. http://www.bellsouthpw…"

Paul Breen replied Nov 10, 2009 to Vega mandolin bridge specs

 7 Nov 11, 2009
Reply by Paul Breen

"Do you know which model you have? If your trying to make a replica, I'm pretty sure…"

Paul Breen replied Nov 10, 2009 to Vega mandolin bridge specs

 7 Nov 11, 2009
Reply by Paul Breen

"I don't know where to direct you but Rex is a Gretsch brand name. You might try Goog…"

Paul Breen replied Nov 10, 2009 to Rex Professioanl Banjo

 2 Nov 10, 2009
Reply by Paul Breen

"Here is a useful link.... http://www.liutaiomottola.com/formulae/Reset.htm"

Paul Breen replied Nov 4, 2009 to Neck Reset Formula

 21 Jan 22, 2017
Reply by Tim Nolte

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service