FRETS.NET

William F.Eden's Discussions (620)

Discussions Replied To (601) Replies Latest Activity

"Hann I also build a bolt on neck and i have found that if you don't fasten the neck…"

William F.Eden replied May 8, 2010 to Some questions about a custom made guitar that just came in

15 May 9, 2010
Reply by William F.Eden

"Ben I met a wounderfull Mandolin player last week from Minnesota he plays with Monro…"

William F.Eden replied May 5, 2010 to PRS Neck Shape

9 May 9, 2010
Reply by William F.Eden

"If I under stand your question right you want to make the neck & end block all i…"

William F.Eden replied May 2, 2010 to Why is it done this way?

5 May 3, 2010
Reply by FRANK

"We wish you all the best Nick from Canada Bill.""""""""""""""

William F.Eden replied Apr 29, 2010 to New shop

7 Jun 14, 2010
Reply by Nick Anthony

"No do-not use alcolhol just use Turpentine or Napta then polish it up .Bill.""""""""…"

William F.Eden replied Apr 19, 2010 to Restoring a guitar to it's original finish

9 Apr 19, 2010
Reply by William F.Eden

"Try a little 50-50 hot water and vinger on the paper it should take it off then wash…"

William F.Eden replied Apr 19, 2010 to Restoring a guitar to it's original finish

9 Apr 19, 2010
Reply by William F.Eden

"I think you are going to find that the finish is already spoiled on the guitar.But y…"

William F.Eden replied Apr 17, 2010 to Restoring a guitar to it's original finish

9 Apr 19, 2010
Reply by William F.Eden

"Like the man says check the scale lenth first before you do any more messing with it…"

William F.Eden replied Apr 14, 2010 to Intonation Out on A String only?

16 Apr 20, 2010
Reply by Jeff Highland

"Give it a try ...Bill."""""""""""""

William F.Eden replied Apr 6, 2010 to Flattening an old pickguard?

4 Apr 18, 2010
Reply by Ry Charters

"Well if you have a inside mold and you can get it into that steam pipe that you have…"

William F.Eden replied Apr 4, 2010 to front plate joint and back plate joint

10 Apr 4, 2010
Reply by Happy Builder

RSS

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service