FRETS.NET

Russell Vance's Discussions (1,232)

Search Forum

View

Discussions Replied To (1220) Replies Latest Activity

"Paul's good on this, as usual:  it's a bass boost/cut control and it has a lot of au…"

Russell Vance replied Jan 1, 2013 to Ibanez SR506 revisited

 17 Jan 15, 2013
Reply by Lee Gendvilas

"Lee, Paul's on the money with this.  The SR506 has a bass boost/bass cut control - n…"

Russell Vance replied Jan 1, 2013 to Ibanez SR506 revisited

 17 Jan 15, 2013
Reply by Lee Gendvilas

"Thanks Tim, The customer has a legitimate right to ask for corrosion and stuff to be…"

Russell Vance replied Dec 30, 2012 to Pickup sanding

 26 Jan 4, 2013
Reply by tadej bratkovic

"Yep, these are things you can do, no doubt.   However, Weld-On used as a gap filler…"

Russell Vance replied Dec 24, 2012 to Acrylic Neck Break..You gotta see this one!!!!

 15 Dec 26, 2012
Reply by Jeff Perkins

"Use maple or cherry as alternatives, you are going to dye it anyway, right? Rusty."

Russell Vance replied Dec 23, 2012 to Headstock 'Fiberboard' source

 19 Dec 23, 2012
Reply by Frank Ford

"PUT IT IN THE BIN RIGHT NOW.  You can thank me later for this advice. Other wize, dr…"

Russell Vance replied Dec 23, 2012 to Acrylic Neck Break..You gotta see this one!!!!

 15 Dec 26, 2012
Reply by Jeff Perkins

"Gibson used wood (holly,  I recall as was said early in the thread) facing for a whi…"

Russell Vance replied Dec 23, 2012 to Headstock 'Fiberboard' source

 19 Dec 23, 2012
Reply by Frank Ford

"2 mm is fine if you are using fibre rather than wood laminate.  I typically use toug…"

Russell Vance replied Dec 23, 2012 to Headstock 'Fiberboard' source

 19 Dec 23, 2012
Reply by Frank Ford

"Generally speaking - 3/32 of an inch or thinner (around 2.5 mm).  When replacing a h…"

Russell Vance replied Dec 23, 2012 to Headstock 'Fiberboard' source

 19 Dec 23, 2012
Reply by Frank Ford

"Hi Micheal, Bill has given you the option of starting with a single source dye/stain…"

Russell Vance replied Dec 22, 2012 to Honeyburst finish on alder

 6 Dec 23, 2012
Reply by Carl Mesrobian

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service