FRETS.NET

Kerry Krishna's Discussions (1,028)

Search Forum

View

Discussions Replied To (907) Replies Latest Activity

"You have an excellent good sized hole there to do all the work through John. The tri…"

Kerry Krishna replied Oct 16, 2011 to tail piece buckled 12 string top

 11 Oct 19, 2011
Reply by Ned Knepp

"Harrison I went to the link, clicked on shop and saw about 20 (?) guitars there. It…"

Kerry Krishna replied Oct 15, 2011 to Convert floating bridge to pin bridge

 12 Oct 16, 2011
Reply by Magnus Hultin

" You are a food man Paul, and if folks like you were not hanging out here and on the…"

Kerry Krishna replied Oct 13, 2011 to Flattening old Bakelite pick guards and source for new guards?

 30 Oct 13, 2011
Reply by Kerry Krishna

"As a last gasp to this, when I was working in the soil Science laboratories at Unive…"

Kerry Krishna replied Oct 13, 2011 to Flattening old Bakelite pick guards and source for new guards?

 30 Oct 13, 2011
Reply by Kerry Krishna

"Paul , of course was 100% correct. It is NOT Bakelite. Thanks for everyone's help. T…"

Kerry Krishna replied Oct 13, 2011 to Flattening old Bakelite pick guards and source for new guards?

 30 Oct 13, 2011
Reply by Kerry Krishna

"OK Paul, you have got me more than half convinced after that. I just took two of the…"

Kerry Krishna replied Oct 12, 2011 to Flattening old Bakelite pick guards and source for new guards?

 30 Oct 13, 2011
Reply by Kerry Krishna

"Greg, what a terrific description of how you do that job! With my Facebook instrumen…"

Kerry Krishna replied Oct 11, 2011 to Flattening old Bakelite pick guards and source for new guards?

 30 Oct 13, 2011
Reply by Kerry Krishna

"Thanks for the posts folks. Paul these guitars are all 1920s/1930s Kay Kraft guitars…"

Kerry Krishna replied Oct 11, 2011 to Flattening old Bakelite pick guards and source for new guards?

 30 Oct 13, 2011
Reply by Kerry Krishna

" Thanks Chris. I actually have 1 inch thick aluminum plate I will use and see if it…"

Kerry Krishna replied Oct 10, 2011 to Flattening old Bakelite pick guards and source for new guards?

 30 Oct 13, 2011
Reply by Kerry Krishna

"Were they worth much before? Were did you get them? And you are a re-enactor! I have…"

Kerry Krishna replied Oct 9, 2011 to REMOVE SURFACE RUST ?

 23 Oct 10, 2011
Reply by Jim Bancroft

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service