FRETS.NET

FRANK's Discussions (888)

Search Forum

View

Discussions Replied To (813) Replies Latest Activity

"THIN SUPPER GLUE WHEN INSTALLING POUND FRET IN DROP A DROP OF THIN S/G IN THE END BO…"

FRANK replied Jan 3, 2009 to frets. glue or no glue?

 14 Jan 9, 2009
Reply by Mark Dobbins

"THANKS YEA THIS INSTRUMENT IS TOGETHER BUT WITH OUT HUMIDITY CONSTANT STRING TENSION…"

FRANK replied Jan 3, 2009 to OVATION ACOUSTICS

 19 Aug 11, 2012
Reply by Tim Mace

"NICK IS RIGHT ADJUST THE TRUSS ROD YOU DON'T NEED A STEW MAC RADIUS BLOCK FRANK USES…"

FRANK replied Jan 2, 2009 to Fretless neck setup

 4 Jan 3, 2009
Reply by danove

"TAYLOR FINISH THERE ARE MANY FOR THE RESULTS I LIKE BEST ARE WITH OIL FIRST AND FREN…"

FRANK replied Jan 2, 2009 to Taylor Finish Matching

 5 Jan 2, 2009
Reply by SlideBender

"ANY TYPE OF SHIM IS NOT GOOD FOR TONE.....RADIUS NUTS ON A FLAT BOTTOM FOR GET IT ..…"

FRANK replied Jan 2, 2009 to tusq pre slotted nuts

 8 Jan 8, 2009
Reply by Darren

"IF WORRIED ABOUT BLOW OUT HOLD A PIECE OF WOOD BEHIND IT FIRMLY THIS WILL DECREASE B…"

FRANK replied Jan 1, 2009 to Drilling bridge pin holes

 4 Jan 2, 2009
Reply by Nick Anthony

"I AGREE BUT TRY TO BUILD WITH OUT BEING KNOWN DO THE REPAIRS GET KNOWN WHEN YOU MAKE…"

FRANK replied Jan 1, 2009 to BFTS opinions please

 17 Aug 19, 2009
Reply by danove

"WELL I TEND TO BUILD COMPENSATED SADDLES AFTER THE FINAL SAPPING I MICRO MESH THE SA…"

FRANK replied Jan 1, 2009 to Saddle Profile.

 2 Jan 2, 2009
Reply by Len Biglin

"GUITAR 12 TIMES 2 PLUS 1/16TH AND INCLINATION"

FRANK replied Jan 1, 2009 to A Question of Intonation

 13 Jan 1, 2009
Reply by FRANK

"CRIMP THE TANG ."

FRANK replied Jan 1, 2009 to Huge fret slots - what's the best way to snug them up?

 15 Jan 1, 2009
Reply by FRANK

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service