FRETS.NET

Russell Vance's Discussions (1,232)

Search Forum

View

Discussions Replied To (1220) Replies Latest Activity

"The rice gig works, good for cleaning out decanters and water bottles as well.    Qu…"

Russell Vance replied Aug 3, 2011 to moldy gibson

 5 Aug 7, 2011
Reply by scott gannon

"Henry, take a chillax pill and listen to what prevails - the Email/forum format is i…"

Russell Vance replied Jul 31, 2011 to old Gibson acoustic repair help

 9 Jul 31, 2011
Reply by Doug T

"Not derogatory or demeaning at all;    "technician" is often used inappropriately as…"

Russell Vance replied Jul 26, 2011 to Luthier recommendation for MA/CT region or beyond

 9 Jul 28, 2011
Reply by Doug T

"I'm with Gary on this one:   while I was fortunate enough to be very well qualified,…"

Russell Vance replied Jul 24, 2011 to Thoughts on Luthiery School Vs. Apprentinceships

 11 Jul 25, 2011
Reply by Gary Fried

"Hi PA, As we are furiously reading ourselves into this problem we get to know the be…"

Russell Vance replied Jul 18, 2011 to Parker Fly broken truss-rod

 26 Sep 21, 2015
Reply by Len Biglin

"Hi Kerry, Most of us have done this - left tape on too long and after you do it once…"

Russell Vance replied Jul 17, 2011 to Laquer problem over previously masked area

 8 Jul 18, 2011
Reply by Kerry Krishna

"Hi Len, apart from this, how you traveling?    I'll have a crack at the xrays - the…"

Russell Vance replied Jul 17, 2011 to Parker Fly broken truss-rod

 26 Sep 21, 2015
Reply by Len Biglin

"At the risk of sounding cavalier or amateurish - the best treatment is to hold the i…"

Russell Vance replied Jul 8, 2011 to remove ovation neck

 17 Jul 12, 2011
Reply by Mike Kolb

"Or this - lots of good gear here:     http://www.veneersupplies.com. I use this site…"

Russell Vance replied Jul 7, 2011 to Glue roller

 8 Jul 10, 2011
Reply by Murray MacLeod

"Toothing and using a solvent to remove extractives/contamination are two entirely di…"

Russell Vance replied May 18, 2011 to Providing "Tooth" When Gluing

 21 May 30, 2011
Reply by Mike Kolb

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service