FRETS.NET

onewent's Discussions (213)

Discussions Replied To (197) Replies Latest Activity

"Thanks Tom, and here's a pic of my set up when I use the press.  I cut a few notches…"

onewent replied Aug 10 to Neck Heat Press Device?

37 Aug 10
Reply by Werther Ellerbrock

"Here's the info I received from Scott years ago when I purchased his press.  I may a…"

onewent replied Aug 10 to Neck Heat Press Device?

37 Aug 10
Reply by Werther Ellerbrock

"I sent you a 'friend request' through this site .. Tom"

onewent replied Aug 7 to Neck Heat Press Device?

37 Aug 10
Reply by Werther Ellerbrock

"It's text only, I can upload it here when I get a minute .. Tom"

onewent replied Jul 9 to Neck Heat Press Device?

37 Aug 10
Reply by Werther Ellerbrock

"BTW, I bought one of Scott's (now deceased) aluminum presses and have had great succ…"

onewent replied Jun 25 to Neck Heat Press Device?

37 Aug 10
Reply by Werther Ellerbrock

"Does the moist towel effect the finish?"

onewent replied Jun 25 to Neck Heat Press Device?

37 Aug 10
Reply by Werther Ellerbrock

"Worked out fine, Titebond did the trick, with masking tape to clamp it on, then some…"

onewent replied Apr 23 to Re-glue Celluloid fingerboard

3 Apr 23
Reply by onewent

"Thanks, Frank, looks like Titebond it is .. easy enough to work with.  I've learned…"

onewent replied Apr 20 to Re-glue Celluloid fingerboard

3 Apr 23
Reply by onewent

"Yes, I've seen how the jig can crush or 'wrinkle' a heel, especially when lots of st…"

onewent replied Mar 18 to The Most Difficult Neck Reset .. need ideas

18 Mar 18
Reply by onewent

"Thanks, Larry, that makes sense.  I've not tackled the issue yet, I have a much more…"

onewent replied Mar 18 to The Most Difficult Neck Reset .. need ideas

18 Mar 18
Reply by onewent

RSS

© 2021   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service