FRETS.NET

onewent's Discussions (226)

Search Forum

View

Discussions Replied To (208) Replies Latest Activity

"Hi Bob .. not sure if you've finished this project up yet.  Re the shims at the 'mus…"

onewent replied Nov 8, 2012 to Vintage National resonator. NO TRUSS ROD?!?!!?

 6 May 7, 2014
Reply by Ron frazier

"I think this is a good idea, and would personally find it a resource.  I always take…"

onewent replied Jun 22, 2012 to Neck Re-Set Gallery

 153 Jun 22, 2023
Reply by LarrySB

"..forgot to mention in the earlier post, but you could always try raising the action…"

onewent replied Jun 12, 2012 to Neck bending troubles

 13 Jun 13, 2012
Reply by Ned Knepp

"Compression fretting, or pull the frets and plane the board flat.  I've also pulled…"

onewent replied Jun 11, 2012 to Neck bending troubles

 13 Jun 13, 2012
Reply by Ned Knepp

"Here's another idea/modification that sprang out of a hard to reach, stubborn brace…"

onewent replied Jun 10, 2012 to Tips for gluing hard to reach Brace

 23 Jun 10, 2012
Reply by onewent

"The beach ball inside a guitar body sparked a memory.  Brainstorming the same thing,…"

onewent replied Jun 4, 2012 to Tips for gluing hard to reach Brace

 23 Jun 10, 2012
Reply by onewent

"If the concern is a weak or loose joint due to the poplar block and dt, why shim wit…"

onewent replied Jun 4, 2012 to Reseating neck after removal: swolen dovetail

 20 Aug 4, 2020
Reply by Harmon Gladding

"Granted, I've not examined this guitar, but my view is the bridge plate didn't come…"

onewent replied May 24, 2012 to 1930's Gibson L00 bridge plate replacement

 40 Jan 10, 2015
Reply by Gerald Cummings

" "There are many (not all) cases where planing a bridge will do the job and not affe…"

onewent replied May 6, 2012 to Dan E's Neck Reset video

 6 Dec 24, 2012
Reply by Robbie Collins

"Hi Lee .. this is timely for me.  Today,  I needed to plug a few 3/16" holes in an e…"

onewent replied Apr 27, 2012 to telescoping brass tubing plug cutters

 16 May 15, 2014
Reply by Ron frazier

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service