FRETS.NET

Gary Fried's Discussions (63)

Discussions Replied To (58) Replies Latest Activity

"I have seen this before. I have many customers that come into my shop with an acoust…"

Gary Fried replied Jan 9, 2011 to Bridges coming off due to under humidifying?

7 Jan 9, 2011
Reply by Kerry Krishna

"I build bolt on instruments with deep cut aways and the only way I sand them is by h…"

Gary Fried replied Dec 31, 2010 to any tips on sanding in curves?

17 Jan 5, 2011
Reply by brian mastro

"The intonation of the string has to do with the diameter of the core wire. The small…"

Gary Fried replied Dec 24, 2010 to String Intonation

6 Dec 27, 2010
Reply by Pierre-Antoine Roiron

"I have done quite a few of these and never had one that didn't have a prominent bell…"

Gary Fried replied Dec 22, 2010 to Repacing a Gibson plastic bridge

6 Dec 22, 2010
Reply by Gary Fried

"I had a very similar problem recently and it ended up being the solder work around t…"

Gary Fried replied Aug 25, 2010 to Startocaster, bridge pickup problem

14 Sep 4, 2010
Reply by Paul Verticchio

"I don't think fender takes the time to orient the grain on most of their necks. I fe…"

Gary Fried replied Aug 29, 2009 to Fender style slab sawn neck question - grain orientation

11 Sep 1, 2009
Reply by Mac Walker

"It makes more sense to have the grain so the growth rings are convex towards the fin…"

Gary Fried replied Aug 28, 2009 to Fender style slab sawn neck question - grain orientation

11 Sep 1, 2009
Reply by Mac Walker

"I don't understand the nut spacing issue either if the guitar is equipped with a loc…"

Gary Fried replied Aug 5, 2009 to Nut spacing tolerances

26 Aug 15, 2009
Reply by Donald A. Fortune

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service