FRETS.NET

thefishinmusician's Discussions (344)

Discussions Replied To (269) Replies Latest Activity

"I just did a stainless yesterday and used a dremel cut off wheel after carefully mea…"

thefishinmusician replied Nov 2, 2008 to Stainless Frets for Stelling Banjo

5 Nov 3, 2008
Reply by David Houchens

"I have used pearliod pickgaurd matereal...Yes it also happened to me...I allways tes…"

thefishinmusician replied Nov 2, 2008 to Block markers on Gibson ES335

2 Nov 3, 2008
Reply by Russell Vance

"What a fantastic site!! I was wondering how to share some of my tips etc. and gettin…"

thefishinmusician replied Oct 31, 2008 to Welcome to FRETS.NET

39 Oct 31, 2008
Reply by thefishinmusician

"Read my other response to the "stainless" connection..I have done 2 Taylors for this…"

thefishinmusician replied Oct 31, 2008 to Stainless Frets for Stelling Banjo

5 Nov 3, 2008
Reply by David Houchens

"hogging....grinding something down to the point where the frets are level...also,som…"

thefishinmusician replied Oct 31, 2008 to Stainless Steel Fretwire...The Good, the Bad and the Ugly!

14 Nov 1, 2008
Reply by Mike Kolb

"I have actually done about 4 refrets with stainless that niether I or the customer k…"

thefishinmusician replied Oct 31, 2008 to Stainless Steel Fretwire...The Good, the Bad and the Ugly!

14 Nov 1, 2008
Reply by Mike Kolb

"Thank you....You are the Roger Maris of Guitar repair!!"

thefishinmusician replied Oct 30, 2008 to Welcome to FRETS.NET

39 Oct 31, 2008
Reply by thefishinmusician

"Welcome to the world of what did they use to glue things together..You are lucky to…"

thefishinmusician replied Oct 30, 2008 to Modern Ibanez Glue - I'm a bit stuck

7 Nov 1, 2008
Reply by Greg Mirken

"My problem with epoxy fret work is the unintentional changing of the scale, tho'mini…"

thefishinmusician replied Oct 30, 2008 to Really wide fret slots

10 Nov 6, 2008
Reply by Jeffrey L. Suits

RSS

© 2023   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service