FRETS.NET

thefishinmusician's Discussions (344)

Discussions Replied To (269) Replies Latest Activity

"Thanks ...He ordered an ebony one for about 200...It should be here today..."

thefishinmusician replied Apr 14, 2020 to Upright bass fingerboard

6 Apr 14, 2020
Reply by thefishinmusician

"He's actually gone at it himself with a  hand belt sander...Not the extension , but…"

thefishinmusician replied Apr 9, 2020 to Upright bass fingerboard

6 Apr 14, 2020
Reply by thefishinmusician

"As it turns out , he's plenty cool about replacing it....Not as spendy as I thought…"

thefishinmusician replied Apr 9, 2020 to Upright bass fingerboard

6 Apr 14, 2020
Reply by thefishinmusician

"Thanks ! "

thefishinmusician replied Dec 7, 2019 to Sideways - out Fender frets with a bound neck...

4 Dec 7, 2019
Reply by thefishinmusician

"Customer was informed on the cost and wants to go ahead..."

thefishinmusician replied Dec 7, 2019 to Sideways - out Fender frets with a bound neck...

4 Dec 7, 2019
Reply by thefishinmusician

"I used Titebond...First , I used some diluted with a bit of water....Then I followed…"

thefishinmusician replied Dec 6, 2019 to Paisley fender is cracking and loose .

6 Dec 6, 2019
Reply by Russell Vance

"Thanks for clearing that up...It could have gotten ugly...."

thefishinmusician replied May 29, 2017 to Martin 000-1 neck attatched by means of.....?

13 May 29, 2017
Reply by Jay Lowe

"Extension is loose....That's all..."

thefishinmusician replied May 29, 2017 to Martin 000-1 neck attatched by means of.....?

13 May 29, 2017
Reply by Jay Lowe

"Narrower ?...Not sure how you mean that...Smaller gap to get steam to ? ..Or like a…"

thefishinmusician replied May 28, 2017 to Martin 000-1 neck attatched by means of.....?

13 May 29, 2017
Reply by Jay Lowe

"Thanks !..As I asked Frank , 15th fret as usual ?"

thefishinmusician replied May 28, 2017 to Martin 000-1 neck attatched by means of.....?

13 May 29, 2017
Reply by Jay Lowe

RSS

© 2023   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service